Inverter-based, DC power source has a simple-to-use operator interface providing only the necessary controls in a compact machine. Portable in the shop or at the job site—at 6.0 kg (13.2 lb) the shoulder strap allows the end user to easily move from location to location. Built-in pulsing capabilities allow the operator to select from four fixed pulse frequencies to satisfy the application.
CK Flex Loc 130 3.8m Tig Torch including sheath
3m Arc Cable Set
Miller RFCS-6M Foot Pedal with 6m Lead
ESAB Sabrecut Argon Mix Flowmeter/Regulator Side Entry
Portable - in the shop or at the job site—at 6.0 kg (13.2 lb) the shoulder strap allows the end user to easily move from location to location.
Digital meter - with presetting. Shows preset current before welding and actual value during welding.
Lift-Arc™ - start provides TIG arc starting without the use of high frequency or the risk of tungsten contamination.
HF start - for non-contact arc starting that eliminates tungsten or material contamination.
Adjustable Hot Start™ - for Stick arc starts. Adjust the optimal start current for the application. The current auto - matically increases the output amperage at the start of a weld.
Adjustable Arc force™ prevents sticking. Adjust the optimal arc force value. Adjustable arc force supports positional welding by increasing the output amperage.
Built-in pulsing capabilities - allow the operator to select from four fixed pulse frequencies to satisfy the application.
VRD function - simple design that reduces the open-circuit voltage to 20 volts when the welding power source is not in use.