Portability is number one when you have to go to the job — because it can’t come to you. The MPi 220P contains all you need to MIG weld in one small lightweight package. With the flip of a switch, all processes are available to meet the appliaction at hand. Full weld process capability of MIG/MAG, Pulse, Stick, and TIG are available to meet the demand of current applications. This Multi Process Mig/Tig/Arc Package includes MB25 3m Mig Torch, CK17V 4m, Switched & Sheathed Tig Torch with Gas Valve, 0.8/1.0mm V-Groove Drive roll kit, electrode holder, workpiece clamp and power cord.
Large graphical display: guides user through process and parameter setup with ease and high visibility.
Synergic welding mode offers the simplicity of single knob control. The machine will select the correct voltage and amperage based on the wire feed speed (WFS) set by the operator.
Adjustable Hot Start™ for Stick arc starts. Adjust the optimal start current for the application. The current automatically increases the output amperage at the start of a weld.
Thermal Overload Protection (Click for Demonstration) - shuts down unit and activates over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when fault is corrected and unit cools.
Built-in upslope/downslope function for TIG helps provide better arc starts and reduces craters.
Adjustable preflow and postflow gives operator better control of the gas parameters affecting weld zone.