- UltimaTig uses an electrode holder, which secures a centring of the electrode, in the same way as during the welding.
- The electrode holder makes it also possible to grind electrodes as short as 8 mm, and from 0,8 up to 8,0 mm in thickness (equipment).
- The electrode holder makes it also possible to grind electrodes, with a “bubble” on the tip, without removing this “bubble” first.
- The electrode is grinded at the edge of the grinding disc; which is the best way of grinding electrodes.
ULTIMA-TIG is constructed with a unique disposable container that automatically collects all toxic dust particles, eliminating the need for separate exhaust systems. Cold wet grinding combined with the diamond wheels high grinding speed ensures that the tungsten electrode always has a polished and even surface with ULTIMA-TIG you will achieve the exact angle that you require.
A special locking device positions the electrode precisely, and the grinding is carried out in the correct longitudinal direction along the electrode. A precise angle is not only important to the quality of the welding seams but it increases the number of re-ignitions between grinding, thus prolonging the electrode life.
ULTIMA-TIG is easy to use. Place the electrode in the electrode holder, adjust the pointer to the required grinding angle and insert the tungsten electrode into the combined stick-out and locking device. After the grinding has taken place you can, if needed, flatten the tip by placing the electrode clamp in the 90° position. ULTIMA-TIG is available in 220V and 110V and comes complete with a 2 metre cable, 250ml bottle of grinding liquid, diamond wheel, electrode clamps (1.6mm-3.2mm), electrode holder, disposable container complete with liquid and a stainless steel stand. ULTIMA-TIG is CE marked and meets all current EU regulations.
Motor yield: 380W
Rpm: 8500/min · Grinding speed: 44 m/sec.