WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 790042064  

    Orbitalum Performance Sawblade Ø 68 Cut Thickness 1.2mm - 2.5mm
    790042064

    £29.11  EX VAT
    SSP Suggested Selling Price = £37.50  YOU SAVE £8.39

    Related Items

    GF Performance Sawblades FAQs

    Practical answers on matching, feeding and looking after mid-grade orbital pipe-cutting saw blades for tube and pipe.

    How do I match the number of teeth to the wall thickness?icon-minus-redicon-plus-red

    Makers of orbital tube saws normally pair a higher tooth count with thin walls and a lower tooth count with thicker walls, and list the wall thickness each blade is meant for. The aim is to keep enough teeth in the material at once so that the load is shared. Machine makers' guidance is generally to choose a pitch that gives roughly two to four teeth engaged in the cut.

    Check the wall thickness of your tube, then pick the blade whose stated wall range covers it. If your walls sit at the edge of two ranges, ask our team or the machine maker rather than guessing.

    How should I feed the blade when cutting stainless steel?icon-minus-redicon-plus-red

    Feed slowly and steadily. Machine makers advise using the slowest speed setting and a cobalt-type high speed steel blade for stainless steel, and say the rate of feed affects both the quality of the cut and the life of the blade. When feeding by hand, keep a steady, continuous pressure rather than forcing the blade through, because forcing can damage or break it.

    On many orbital saws the handwheel is there precisely to give smooth, controlled feed. Take the speed and feed ranges for your machine from its manual.

    Do I need coolant or lubricant when cutting tube?icon-minus-redicon-plus-red

    Machine makers' operating guidance says to make sure enough coolant is flowing over the cutting teeth, because heat and friction shorten blade life and spoil the cut finish. Stainless steel in particular tends to harden if the tool rubs rather than cuts, so a good flow of cutting fluid helps.

    Which fluid and how it is applied depends on the machine and the material, so follow the machine maker's manual. Be aware that cutting fluid must later be removed from the tube end before welding.

    Why does stainless steel dull a blade faster, and how do I avoid it?icon-minus-redicon-plus-red

    Stainless steel work hardens: heat and pressure from a tool that is rubbing rather than cutting can make the surface harder, which then wears the next teeth even faster. Tool makers advise keeping tools sharp, running a suitable feed so the teeth cut instead of rub, and keeping the tool moving rather than letting it dwell in the cut.

    In practice that means a steady feed (no stopping partway through), a cobalt-grade blade where the maker recommends one, and replacing the blade once it stops cutting cleanly.

    Shop Similar Categories