SHOW PRICES INCLUDING VAT
Trustpilot
Click to visit the Rapid Blog - Supporting welders every step of the way
0Your Basket : £ 0.00
WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE

Speedglas G5-01 Adflo Parts

Speedglas G5-01 Adflo Parts FAQs

Straight answers to the questions people ask most when choosing and looking after spare parts for a heavy-duty powered air welding helmet.

How do I find the right spare for my heavy-duty welding helmet?icon-minus-redicon-plus-red

Check the model marking on the helmet and the filter, then compare it with the parts list in the user manual. Heavy-duty helmets are often sold in several versions, with different filters, head protectors and air ducts, so what fits one may not fit another.

If an old part is still in place, note any number printed on it and compare it side by side with the replacement. Where you are unsure, our team can help you match the part to the helmet before you order.

Which parts wear out first and should be kept as spares?icon-minus-redicon-plus-red

The outer protection plates wear fastest, because they take spatter and scratches. After that come the sweatbands, which absorb sweat and break down, and the head and neck protectors, which wear from heat and washing.

Filters for the powered air unit, the face seal and the battery are all consumable too. Keeping a few spare outer plates and a sweatband means you can stay protected and comfortable without waiting when one is spoilt.

What are the different head and neck protectors, and which should I choose?icon-minus-redicon-plus-red

The head and neck protector covers the areas around the helmet shell and stops arc light, spatter and fume reaching your skin. They come in fabric, flame-retardant fabric and leather, in different sizes.

Leather tends to last longest in heavy spatter and overhead welding, while fabric is lighter and cooler. Pick the one that matches the heat and spatter at your workplace, and make sure the size gives full coverage without pulling on the helmet.

How do I choose between sweatband types?icon-minus-redicon-plus-red

Towelling and fleece-type bands absorb sweat well and feel soft but wear quickly and need replacing often. Leather bands last longer and are easier to wipe clean, but they feel firmer and can be warmer.

Whichever you prefer, replace the band when it is hard, stained or no longer comfortable. A fresh band also keeps sweat from running into the headband mechanism and the helmet interior.

How do I know when the outer protection plate needs changing?icon-minus-redicon-plus-red

Change it when your view is reduced by scratches, spatter marks or pitting, or when it is cracked or warped by heat. A damaged plate also scatters light, which tires your eyes.

Heat-resistant and scratch-resistant plates last longer in tough conditions. Always fit the plate the way the manual shows and check that it seats flat so that no spatter can get behind it.

What do the magnifying lenses do and how do I pick the strength?icon-minus-redicon-plus-red

A magnifying lens fits behind the welding filter and makes fine detail easier to see, which is helpful for close TIG work or when your eyesight needs a little help. The strength is measured in diopters, and a higher number gives more magnification.

Start with a lower strength and move up only if you need to. Too much magnification makes your working distance awkward, and anyone with a prescription should check with their optician first.