WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE

Stoppers

  • NSXXTB Nylon Through Bore Expanding Pipe Stopper, 1/2 - 6

    Nylon Through Bore Expanding Pipe Stopper, 1/2 - 6" (13 - 152mm)

    Rapid ref : NSXXTB
     
     

    From £ 6.36 EX VAT
     

       Expand Options

  • SSX.X Steel Expanding Pipe Stopper, 1 1/2 - 20

    Steel Expanding Pipe Stopper, 1 1/2 - 20" (38 - 508mm)

    Rapid ref : SSX.X
     
     

    From £ 6.98 EX VAT
     

       Expand Options

  • ASX.X Aluminium Expanding Pipe Stopper, 1 1/2 - 20

    Aluminium Expanding Pipe Stopper, 1 1/2 - 20" (38 - 508mm)

    Rapid ref : ASX.X
     
     

    From £ 10.18 EX VAT
     

       Expand Options

  • ISXX Inflatable Pipe Stopper with Schrader Valve, 2 - 36

    Inflatable Pipe Stopper with Schrader Valve, 2 - 36" (51 - 914mm)

    Rapid ref : ISXX
     
     

    From £ 18.00 EX VAT
     

       Expand Options

Stoppers FAQs

Answers on expanding and inflatable pipe stoppers used to seal the ends of a pipe for gas purging while you weld.

What is a pipe stopper and how is it used for purging?icon-minus-redicon-plus-red

A pipe stopper is a plug that seals the end of a pipe or the section either side of a joint, so the inside can be filled with inert gas such as argon while you weld. Without a back purge, the inside of a stainless steel weld oxidises and forms a rough, dark crust, so keeping air away protects the root.

The gas goes in through a port and the air is pushed out through a vent. Check the maker's instructions for how to fit the type you have.

How do I choose the right size of stopper?icon-minus-redicon-plus-red

Measure the internal diameter of the pipe, not just the nominal size, because wall thickness changes the bore. Makers list each stopper against an internal diameter range, so pick one whose range covers your pipe, ideally with the pipe somewhere in the middle of the range rather than at an extreme.

Check the range stated on the stopper or its data sheet. An out-of-round pipe, internal weld bead or scale can stop a stopper sealing properly.

What is the difference between expanding and inflatable stoppers?icon-minus-redicon-plus-red

An expanding stopper is tightened mechanically: turning a wing nut or bolt squeezes a rubber seal outwards against the pipe wall. An inflatable stopper is a bladder that is filled, often with the purge gas itself, until it seals all round the inner circumference of the pipe.

Expanding types are firm and suit regular round bores of a limited size range. Inflatable types suit larger or less regular bores but need care not to over-inflate. Follow the maker's limits.

Can I rely on a pipe stopper to stop purge gas leaking out?icon-minus-redicon-plus-red

No. The HSE says the seal on dams and bladders should not be relied on to prevent gas leakage, and that purging gas leaking or being discharged can accumulate in confined spaces. Always provide a proper vent path and a safe place for the gas to go.

If you are working in or near an enclosed space, follow your risk assessment, ventilation and gas monitoring arrangements, and the safe system of work for that job.

Is there an asphyxiation risk when purging pipework with argon?icon-minus-redicon-plus-red

Yes. Argon and other inert purge gases are heavier than air and can displace oxygen, particularly in low or enclosed areas, and you may not notice before you lose consciousness. The HSE highlights gas building up inside fabrications and confined spaces.

Plan where the gas will vent, ensure ventilation, use oxygen monitoring where your risk assessment requires, and never use oxygen to improve the air. Follow the maker's instructions.

Why must the pipe be vented, and how do I stop a stopper blowing out?icon-minus-redicon-plus-red

Purge gas needs somewhere to go. Makers build vents or exhaust ports into purge dams so air can leave as the gas flows in, and welding guidance warns against over-pressurising the pipe, which can cause weld defects. Too much flow also causes turbulence that pulls air in.

Keep the vent open and the flow low, and make sure the stopper is correctly sized and fully tightened or inflated to the maker's instructions, because pressure behind a stopper can push it out.