WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE

CK9 Torch Parts

CK9 Torch Parts FAQs

Replacement parts for the torch itself - bodies, handles, power cables and backcaps - and how to match them to your torch.

What counts as a torch part as opposed to a front-end consumable?icon-minus-redicon-plus-red

The torch parts are the structural and conducting pieces behind the consumables: the torch body (head), the handle, the power cable, the gas hose where it is a separate item, the backcap and its O-ring, and the heatshield. A torch is normally described as the body plus the cable-hose assembly and other components.

The consumables at the front, such as cups, collets and collet bodies, wear faster and are swapped far more often. The torch parts last longer, but they are still wear items: bodies can be damaged by bending or heat, handles crack, cables fray and seals harden. Treat them as a planned replacement, not a lifetime fit.

How do I work out the right replacement part for my torch?icon-minus-redicon-plus-red

Start with the torch itself. Look for the type or series marking on the body, handle or cable fitting, and check the data plate or manual for the torch type, cooling method and rating. Then compare the part number on the old part, if it is still legible, with the part list in the manual.

Torch type usually decides which sizes of backcap, collet body and cup fit, so a part that looks the same may not match. Photograph the old part and note how the cable connects to the machine, because connector style is a common cause of wrong orders. If you cannot find any marking, our team can help you identify it from photos.

Should I choose a flexible or a rigid torch body?icon-minus-redicon-plus-red

A flexible body lets you set the head angle to reach awkward joints, which can reduce strain on the hand and wrist. A rigid body is a fixed shape that is simple, steady and suits repeat work where the angle never changes.

The trade-off is wear: a flexible neck contains a bendable internal section that can eventually loosen or break if it is bent repeatedly, whereas a rigid body has nothing to flex. Ask what your joints really need. If you rarely change the angle, rigid is usually the more durable choice; if access varies job to job, flexible is more practical. Make sure the body you choose is made for your torch type and current rating.

How do I bend a flexible torch body without damaging it?icon-minus-redicon-plus-red

Follow the bend limit given in the manual for your torch, because bending past it can damage the neck. As general practice, make gentle bends, spread the bend along the flexible section rather than kinking one spot, and avoid bending the neck back and forth more often than you need to.

Set the angle for the job, then leave it. Do not use the neck as a lever, do not bend it to free a stuck part, and never bend a hot torch with bare hands. If the neck feels loose, will not hold its angle or the insulation is split, replace the body rather than continue using it. Your manual is the right place to check the maximum angle.

What does the backcap do and how do I choose between long, medium and short?icon-minus-redicon-plus-red

The backcap screws into the rear of the torch head, holds the tungsten electrode firmly in place and helps keep air from leaking into the head. Backcaps normally come in long, medium and short lengths.

Choose by three things: the torch type, because it dictates the size; the access you have to the joint, since short, button-style caps suit tight spaces; and the tungsten length. A long backcap takes a full-length electrode, while medium and short caps are normally used with electrodes cut down to a shorter piece. Keep the right cap for the way you work, and replace one with damaged threads or a loose grip on the electrode.

Why should the backcap O-ring be replaced and how do I know it is worn?icon-minus-redicon-plus-red

The O-ring helps seal the rear of the torch head. If it is cracked, flattened, dry or hardened, it may let air be drawn into the shielding gas or let gas escape, which can show up as porous welds or a discoloured tungsten.

Inspect the O-ring whenever you remove the backcap to change a tungsten. Replace it if you see cracks, flat spots or brittleness, and always use the right size for your backcap, because one that is too loose leaks and one that is too tight can tear or strain the threads. Some welders add a thin smear of suitable lubricant, but check your manual first. If you still suspect a leak, a soap-solution check at the fittings can help find it.