WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE

ESAB Aristo Tech HD Parts

ESAB Aristo Tech HD Parts FAQs

Plain answers on replacing the cover lenses and sweatbands of an auto-darkening welding helmet, and how to be sure you order the right spare.

What is the difference between an outer cover lens, an inner cover lens and the filter?icon-minus-redicon-plus-red

An auto-darkening helmet has three layers in front of your eyes. The outer (front) cover lens is a clear, replaceable plate at the very front that takes the spatter and scratches. Behind it sits the auto-darkening filter, which is the part that darkens when the arc strikes. The inner (inside) cover lens sits between the filter and your face and protects the back of the filter.

The cover lenses are the easily replaced wear parts that protect the filter. Maker manuals say the filter should only be used with the inner cover lens fitted, so check that both cover lenses are in place before you weld.

When should I replace the outer cover lens?icon-minus-redicon-plus-red

Replace it when it is cracked, scratched, pitted or so dirty that cleaning will not restore a clear view. Helmet makers' manuals say to replace a damaged front cover lens regularly, and some say to inspect it often and replace it immediately once it is scratched, cracked or pitted by spatter.

A marked lens scatters the arc light, makes it harder to see the joint and strains your eyes, which can lead to poor welds. How often you will need a new one depends on the process, the amount of spatter and how the helmet is stored, so check it before each work session.

When does the inner cover lens need replacing?icon-minus-redicon-plus-red

The inner cover lens is protected by the filter and outer lens, so it usually lasts much longer than the front one. Maker manuals say to replace it if it is damaged. Also replace it if it becomes scratched, hazy or marked in a way that cleaning will not remove, because it sits right in your line of sight.

If your view is poor even after the outer lens is new and clean, check the inner lens and the filter surface as well. Take care when removing it, since many designs flex the inner lens out of its holder and a rough pull can bend it or damage the filter.

Is it safe to weld with a cracked or missing cover lens?icon-minus-redicon-plus-red

No. Replace a cracked or damaged cover lens before you weld. Cover lenses keep spatter off the filter, and manuals state that the filter must only be used together with its inner cover lens, so never weld with either lens missing.

A crack or pit also distorts your view of the weld pool. If the filter itself is cracked or damaged, or fails to darken when you strike an arc, stop welding immediately and do not use the helmet until it has been put right. Use only the replacement parts the manual specifies, as unapproved parts or modifications can void the warranty and put the wearer at risk.

How do I find the right replacement cover lens size for my helmet?icon-minus-redicon-plus-red

Cover lenses are sized to fit a particular helmet shape, and sizes differ between helmet types. Do not choose by looks. Find the helmet model on the label or in the manual, then use the spare parts list in the manual to see which front lens and inside lens go with it. Note whether you need a front (outer) or inside (inner) lens, because they are different sizes.

If you only have the old lens, measure the width and height of the lens itself, but also compare them with the helmet model. Manufacturers say to use only the replacement parts that their manual specifies, so confirm before ordering.

How should I clean the cover lenses and filter?icon-minus-redicon-plus-red

Follow the manual for your helmet. Makers generally say to wipe the helmet with a soft cloth and to clean the filter surface regularly, without strong cleaning solutions. Do not use solvents on the filter screen or helmet parts, and do not immerse the filter in water.

Keep the sensors and solar cells clean with a lint-free cloth or tissue. A dirty sensor or front lens can stop the filter reacting properly. The sensor cleaning fluid varies between manuals, so use only what yours names. If a lens stays hazy or scratched after cleaning, replace it rather than scrubbing harder.