WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE

Exothermic Cutting

Exothermic Cutting FAQs

Straight answers to the questions people ask most when choosing and using exothermic cutting equipment.

How does exothermic cutting work?icon-minus-redicon-plus-red

An exothermic cutting rod is a steel tube filled with metal rods. The rod is held in a torch, a stream of oxygen is fed through the tube, and the end of the rod is lit with an electrical spark or arc from a battery or welding power source. Once lit, the rod burns fiercely in the oxygen, giving off very intense heat that melts and blows away the material in front of it. It keeps burning as long as the oxygen flows.

Unlike ordinary gas cutting it needs no fuel gas, and it does not depend on the material burning in an oxygen jet, which is why it can cut things other processes cannot.

What can an exothermic torch cut?icon-minus-redicon-plus-red

It is used on materials that are hard to cut by other means: carbon steel, stainless steel, cast iron, aluminium and other non-ferrous metals, as well as slag, refractory material, concrete and brick. It also cuts through rusty, dirty, painted or corroded metal, where other processes struggle.

It is common in demolition, scrap cutting, maintenance and repair, and rescue and recovery work, and for cutting out seized or damaged parts. It makes a rough cut with a lot of molten material, so it is not used where a neat edge matters.

What do I need to start exothermic cutting?icon-minus-redicon-plus-red

You need a torch that holds the rods, oxygen from a cylinder with a regulator that can provide the high flow the torch needs, suitable oxygen hose, a source to light the rod (a battery or a welding power source, with the right lead and a striker or switch) and the rods themselves. Ready-made kits bring the main items together. The rods cannot be used in an ordinary electrode holder, because they need oxygen fed through them.

You also need full protective clothing, a face shield or welding helmet, gloves and sturdy boots, and a safe working area. Check that every item is rated for oxygen and for the flow involved, and follow the torch maker's instructions.

What are the safety risks and what protection do I need?icon-minus-redicon-plus-red

Exothermic cutting is a very hot, hazardous process. It throws out large amounts of molten metal and slag, sparks and intense light, and the rods burn at extremely high temperature. The oxygen supply greatly increases the fire risk, so clothing and anything flammable can ignite far more easily.

Wear flame-resistant clothing that covers you fully, heavy gloves, safety boots, and a face shield or helmet with the right filter. Clear the area of combustible material, have a fire extinguisher to hand, make sure nobody is behind or below the cut, and follow your hot work procedures. Fume can be harmful, so ventilate or use respiratory protection as your risk assessment requires. Never use it where flammable gas, vapour or dust may be present.

What oxygen supply and regulator do I need?icon-minus-redicon-plus-red

Exothermic cutting uses a large amount of oxygen, so the cylinder and regulator must be able to provide the flow and pressure the torch maker specifies. A light-duty welding regulator may not pass enough flow. Use a regulator designed for oxygen and rated for the pressure and flow required, and fit any protective devices the maker specifies.

A cylinder empties quickly at high flow, and a larger cylinder or several cylinders joined together give longer cutting time. Keep oxygen equipment away from oil and grease, which can ignite violently in pure oxygen.

How does it compare with plasma and oxy-fuel cutting?icon-minus-redicon-plus-red

Exothermic cutting does not give a neat finish, and it is not meant to. Oxy-fuel gives a cleaner cut in steel, and plasma is faster and neater on conductive metals. What exothermic cutting offers is the ability to cut almost anything, including rusty, coated or non-metallic material, with simple equipment that can be used where mains power is limited, since a battery can light the rod.

The rods are used up as you cut, so it is not the right choice for long, repeated cuts. Choose it for demolition, repair and awkward jobs rather than for production cutting.


Unlike any other cutting process used today, the Arcair SLICE systems can cut, burn or pierce virtually any metallic, non-metallic or composite material. The SLICE exothermic torch cuts through hard-to-cut materials such as mild, stainless steel alloy steel, cast iron, aluminium, magnesium and other non-ferrous metals, slag and refractory materials, and concrete or brick. Even if it’s caked with rust, mud or other corrosion, SLICE will cut through anything. There’s never been a more versatile cutting tool.