WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE

Pipe Storage

Pipe Storage FAQs

Practical answers on choosing, loading and looking after pipe racks so your pipe stays safe, straight and clean.

How should I load a pipe rack, and what does its rated capacity mean?icon-minus-redicon-plus-red

The rated capacity is the most the rack is designed to carry when it is set up as the maker describes. You will find it on the data plate or load notice, and it should never be exceeded. Overloading can weaken the structure, and that is not always visible.

Spread the pipe evenly across the arms or levels rather than piling it at one end or in one spot, and put the heaviest pipe on the lower levels where you can. Add up the weight of the pipe you plan to store, not just the number of lengths.

If a rack has been linked to another, upgraded or altered in any way, check with the maker that the rating on the plate still applies to the new arrangement.

How do I stop pipes rolling off a rack?icon-minus-redicon-plus-red

Round pipe rolls, so it needs something to hold it in place. A good rack has upturned ends, side stops or arms that angle the pipe into a cradle. Where a rack does not do this on its own, use wedges or chocks that are secured so they cannot be knocked out.

When you take a pipe out, think about what the others will do. Take pipe from the top layer or the end of the stack first, keep clear of the open side, and re-fit any stop that you removed. Do not stack pipe higher than the rack is designed for.

Stacking too many layers can also squash thin-walled pipe out of round, so a rack that spreads the load is better than a pile.

Can I store stainless steel pipe on the same rack as carbon steel pipe?icon-minus-redicon-plus-red

It is best not to. Stainless steel stored against carbon steel can pick up iron particles and rust marks, which can spoil its corrosion resistance and its appearance. Where possible, keep stainless pipe on its own rack and away from areas where carbon steel is ground or cut, because the dust spreads.

If you must share a rack, wrap the stainless pipe thoroughly and keep it clear of bare steel arms, straps and chains. Plastic, wood or similar protective sleeves on the contact points help, and forklift tines should be covered too.

If the pipe has been in contact with carbon steel, clean the surface before it is welded or fitted.

How do I stop carbon steel pipe rusting in storage?icon-minus-redicon-plus-red

Moisture is the cause, so aim to keep the pipe dry. Rust develops faster as humidity rises, and condensation, rain and damp floors are the usual sources. Store pipe off the ground, ideally indoors in a dry, ventilated space.

If pipe has to be stored outside, cover it with something that sheds water but still lets air move, because a sealed sheet can trap condensation underneath. Warm, damp air meeting cold steel is a common cause of condensation, so avoid sudden changes where you can.

Check the pipe now and then. A light surface film can usually be removed, but pitting means the pipe should be assessed before use.

How often should a pipe rack be inspected, and what should I look for?icon-minus-redicon-plus-red

Work equipment needs to be kept in good, safe working order, and racks are no exception. A sensible routine has three parts: staff report any damage as soon as they see it, a nominated person does a regular visual check, and a competent person carries out a more thorough inspection from time to time. How often depends on how heavily the rack is used and on the maker's instructions and your risk assessment.

Look for bent or twisted arms and uprights, cracked welds, loose fixings, missing stops, worn or damaged wheels and brakes on mobile units, and any sign the rack leans or is uneven. Check that the data plate or load notice is still there and legible.

Do I need end caps on stored pipe?icon-minus-redicon-plus-red

They are often worthwhile. Caps keep dust, moisture, swarf and small pests out of the bore, and they protect bevelled or threaded ends from knocks that would need re-machining before welding or fitting. This matters most for stainless steel, high-purity work and pipe with a coated or clean interior.

Use caps that fit properly and do not trap moisture against the steel. Check they are all still in place when you take pipe from the rack, and replace any that are lost.

If the inside of a pipe matters for the job, look inside before you use it and clean it if needed, even when caps were fitted.