WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE

Welding Shelters

This range of welding shelters comes exclusively from CEPRO, one of the leaders in the market specialising in welding safety. 

CEPRO welding umbrellas are designed specifically for outdoor welding, which provides reliable and secure protection of the outdoor work site from sun and rain.

CEPRO welding tents are extremely suitable for work in the open air. Work can be continued for longer and everlasting periods. Work can be continued for longer and everlasting periods due to the improvement made to achieve supreme working conditions in the industry, thus reducing sick leave to a minimum. 

Welding Shelters FAQs

Answers to common questions about welding umbrellas and tents for outdoor and site work.

Why would I use a welding shelter outdoors?icon-minus-redicon-plus-red

A shelter gives the welder and the work some protection from rain, sun and wind. Wind matters most with gas-shielded processes such as MIG and TIG, because a breeze can blow the shielding gas away from the weld pool and lead to porosity and a poor weld.

If there is a risk of heavy rain, the welder, the equipment and the workpiece should be covered. A shelter is one practical way to do that, and it also keeps the welder more comfortable so work can carry on in poorer weather.

Does a welding shelter deal with welding fume?icon-minus-redicon-plus-red

No. A tent or umbrella is a weather cover, not a ventilation system. Welding fume is a health hazard outdoors as well as indoors, and the HSE says local exhaust ventilation cannot be relied on to capture fume at outdoor work, so suitable respiratory protective equipment (RPE) should be provided and the protection of others nearby considered.

If you fit side walls or work in a small enclosed tent, fume can build up more than in open air. Keep airflow in mind, follow your risk assessment and use the RPE it calls for.

Do I still need screens to protect people walking past?icon-minus-redicon-plus-red

Yes, if people without proper eye protection could see the arc. Looking at a welding arc can cause arc eye, a painful injury that usually shows up a few hours later. TWI advises screening off the area where welding is taking place to protect other workers and members of the public.

A weather cover is not designed to do this job. Use proper welding screens or curtains made for arc radiation, positioned around the work, as well as the shelter.

Is it safe to weld under a shelter when it is raining?icon-minus-redicon-plus-red

Rain raises the electric shock risk. Welding in wet, damp or humid conditions reduces the resistance of the body, so use dry insulating mats and boots and keep gloves and clothing dry. For outdoor work, check that the power source is rated for the conditions, and cover the welder, equipment and workpiece if heavy rain is likely.

A shelter helps keep rain off, but it does not make wet ground or wet equipment safe. Dry and check equipment that has got wet before you use it, and follow the maker's instructions and your risk assessment.

Can I leave flammable materials near the welding area under a shelter?icon-minus-redicon-plus-red

No. Sparks and molten metal can ignite combustible materials, so the HSE advises removing flammable material from the area before hot work. Remember that sparks can travel, so also look at what is below, beside and beyond the work area.

The tent or umbrella fabric itself needs thought too. Keep the arc, cutting sparks and hot metal away from the cover, and stop work and move the shelter if it is being hit by spatter. Your risk assessment and any hot work permit will set the precautions.

Should I choose a welding umbrella or a welding tent?icon-minus-redicon-plus-red

It depends on the job. An umbrella is quick to put up and move, so it suits short jobs at one spot, such as a pipe joint or a repair, where one welder needs cover overhead. A tent gives more room, can often have side panels, and suits longer jobs, bigger workpieces or more than one person.

Think about how long you will be there, how much space you need around the work, how often you will move it and how exposed the site is. Our team can help you choose.