MDB-2F Spare Parts FAQs
Straight answers to the questions people ask most about spare parts for a two-filter cartridge extraction unit with a dust container.
How do I identify the correct spare for my extraction unit?
Use the data plate on the unit for the model and serial number, then match the part against your manual or parts list. Dust containers, lids, seals, holders and cover plates differ between units and between sizes, so appearance alone can mislead.
If you are not sure, send photographs of the old part and the data plate to our team.
How do I know when to change the filter cartridges?
Falling suction at the extraction point, more fume or dust in the workshop, or an indicator showing high resistance across the filter are the signs. How often depends on how much and what kind of fume or dust the unit handles.
Follow the maker's guidance, and change the filters before they block completely, as a clogged filter strains the fan.
Should both filters be changed together?
It depends on the unit, so follow the manual for your own machine. In a unit with more than one filter, the air divides between them, and a filter that has been in use for a while resists the flow more than a new one. Mixing new and old filters can therefore load them unevenly.
Some makers advise changing filters as a set, while others allow them to be changed individually when each is monitored separately. Check the data plate, the manual and the filter condition indicator for your unit, and ask our team if the guidance is unclear.
How often should the dust container be emptied?
Empty it before it becomes full, not after. An overfull container can block the flow and may let dust back into the filter. How often depends on how much dust you produce.
Wear respiratory protection and gloves, avoid shaking the contents into the air, bag the waste, and dispose of it in line with your risk assessment.