WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 0160307002  

    ESAB Plastic Outer Cover Lens - 51mm x 108mm (Pack of 100)
    0160307002

    £31.74  EX VAT
    SSP Suggested Selling Price = £43.00  YOU SAVE £11.26
     Buy in 3 easy interest free payments of £10.58† with

    ESAB Albatross 4000X Parts FAQs

    Spare lenses, filter cassettes, headgear and fixings for a passive or auto-darkening welding helmet: what wears and how to buy the right one.

    When should I replace the outer cover lens?icon-minus-redicon-plus-red

    Replace the front cover lens once it is cracked, scratched or pitted, and clean the filter with a lint-free cloth rather than strong cleaning solutions. The inner and outer lenses are consumables, so expect to renew them over time using the lenses your manual specifies.

    How often depends on the process, the amount of spatter and how the helmet is handled. Replace the lens when it is damaged or when spatter has built up enough to hamper your view. Avoid resting the helmet on its front lens, which scratches it, and remove any protective film as the manual describes.

    What do the markings on helmet spares mean?icon-minus-redicon-plus-red

    The markings on a helmet part show what standard it was made and tested to. Standards for eye and face protection have been updated over the years, so older and newer parts may carry different markings. The welding-specific requirements are covered by their own part of the standard for protectors used for welding and related techniques.

    Products certified to an earlier standard may still be in use, so whether an older item is still suitable is a matter for the maker's guidance and your risk assessment. When buying spares, use the parts the maker specifies for your helmet, and check the markings and manual. Ask the maker if you are unsure.

    Can I replace the auto-darkening filter cassette myself?icon-minus-redicon-plus-red

    Whether the filter can be taken out depends on the helmet design, so check the manual. Never open or tamper with the filter, because there are no user-serviceable parts inside, and do not modify the filter or helmet unless the manual allows it. Only use replacement parts the manual specifies.

    Choose a cassette listed for your helmet, because fit and fixings differ between shells. After fitting, keep the sensors and solar cells clean and use the test button, if there is one, to check that it darkens before you weld. If a filter does not darken when you strike an arc, stop welding at once.

    Why does my auto-darkening filter flicker or not darken?icon-minus-redicon-plus-red

    Start with the simple checks. Clean or replace a soiled or damaged front or inner lens, and wipe the sensors clean. If the welding current is low, the sensitivity may need turning up. Check the battery is in good condition, correctly fitted and has clean contacts. Headgear set unevenly can also cause patchy darkening, because the distance from your eyes to the filter differs.

    If the problem cannot be corrected, stop using the helmet immediately and contact the supplier or maker. Do not weld with a filter that does not darken reliably.

    Shop Similar Categories