WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 0700000243  

    ESAB Pro Head Gear
    0700000243

    £8.71  EX VAT
    SSP Suggested Selling Price = £11.61  YOU SAVE £2.90

    ESAB Albatross 4000X Parts FAQs

    Spare lenses, filter cassettes, headgear and fixings for a passive or auto-darkening welding helmet: what wears and how to buy the right one.

    Is it safe to keep welding with a scratched or damaged helmet part?icon-minus-redicon-plus-red

    Welding arcs give off ultraviolet and infrared radiation as well as bright light. Arc eye is an acute injury to the front of the eye that usually shows a few hours after exposure, so harm can be done before you notice anything.

    A scratched or pitted cover lens should be replaced. If the filter is cracked, damaged or does not darken when you strike an arc, stop welding at once and contact the supplier or maker, because the filter is not something to repair yourself. Stop using a helmet if a fault cannot be corrected. Follow your helmet manual and your risk assessment.

    How do I find the right cover lens for my helmet?icon-minus-redicon-plus-red

    Manuals list the front lens and the inner lens as separate parts, and the filter is only to be used with its inner lens in place, so check which one you need. Use the replacement parts your manual specifies, because lenses that look similar can sit badly or leave gaps.

    Check the manual or the markings on the helmet for the model, then match the shape and overall size of the old lens. If you cannot find a part number, measure the width and height in millimetres and note the type of filter fitted. Our team can help you choose if you send the helmet model and a photo.

    What do the markings on helmet spares mean?icon-minus-redicon-plus-red

    The markings on a helmet part show what standard it was made and tested to. Standards for eye and face protection have been updated over the years, so older and newer parts may carry different markings. The welding-specific requirements are covered by their own part of the standard for protectors used for welding and related techniques.

    Products certified to an earlier standard may still be in use, so whether an older item is still suitable is a matter for the maker's guidance and your risk assessment. When buying spares, use the parts the maker specifies for your helmet, and check the markings and manual. Ask the maker if you are unsure.

    Why does my auto-darkening filter flicker or not darken?icon-minus-redicon-plus-red

    Start with the simple checks. Clean or replace a soiled or damaged front or inner lens, and wipe the sensors clean. If the welding current is low, the sensitivity may need turning up. Check the battery is in good condition, correctly fitted and has clean contacts. Headgear set unevenly can also cause patchy darkening, because the distance from your eyes to the filter differs.

    If the problem cannot be corrected, stop using the helmet immediately and contact the supplier or maker. Do not weld with a filter that does not darken reliably.

    Shop Similar Categories