SHOW PRICES INCLUDING VAT
Trustpilot
Click to visit the Rapid Blog - Supporting welders every step of the way
0Your Basket : £ 0.00
WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
0700000429 ESAB F20 Air Flip-Up Welding Helmet with 110 x 90mm Shade #10 Passive Lens
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 0700000429  

    ESAB F20 Air Flip-Up Welding Helmet with 110 x 90mm Shade #10 Passive Lens
    0700000429

    £143.89  EX VAT
    SSP Suggested Selling Price = £191.85  YOU SAVE £47.96
     Buy in 3 easy interest free payments of £47.96† with
    Shop Parts

    The ESAB F20 is a lightweight shell and comes with headgear for comfort during usage. This welding helmet has a flip-out action where the welding glass is fitted. Within the helmet is an inside viewing visor that is easily replaceable. Welding glass 10 DIN is included in all ESAB helmets. This product is specially made to be used with ESAB PAPR systems. This helmet includes an air duct and face seal.

    Features

    • 90 x 110mm options for flip front
    • DIN lenses are changeable with ease
    • Respiratory option with ESAB PAPR
    • CE-approved according to EN175

    Brochures & Manuals

    BROCHURES & MANUALS
       View Brochure
       ESAB F20 User Manual
       ESAB PAPR System GB

    Related Items

    ESAB Welding Helmets FAQs

    Practical answers on choosing, using and looking after welding and weld-and-grind helmets, including flip-up and air-ready styles.

    How often should I replace the cover lens on my helmet?icon-minus-redicon-plus-red

    There is no single interval. Replace the clear outer cover lens whenever it is cracked, deeply scratched, pitted by spatter or too dirty to clean with a soft cloth. A damaged cover lens makes the arc harder to see and, on an auto-darkening helmet, can interfere with the sensors.

    Cover lenses are normally specific to the helmet, so check the manual or markings for the correct part. Replacing a cover lens is far less involved than replacing the filter itself, so it is worth checking it regularly and changing it early.

    How do I choose the right shade for my welding process?icon-minus-redicon-plus-red

    Shade depends on the process and the current: a higher current gives a brighter arc and needs a darker shade. Published shade charts are only a guide, and different charts give slightly different numbers, so start from the chart in your helmet manual and adjust to what you can comfortably see.

    If you are unsure, begin with the darker shade rather than the lighter one, and never go lighter than the maker recommends for the process. Low-current TIG, plasma cutting and heavy-current MIG or stick can all call for quite different settings. Our team can help you match a helmet to your work.

    What is arc eye and what should I do if I think I have it?icon-minus-redicon-plus-red

    Arc eye is an injury to the front surface of the eye caused by the ultraviolet radiation from welding. The eye usually becomes painful and red a few hours after exposure, and it often feels gritty. Most cases are temporary, but other parts of the eye can also be damaged by welding radiation.

    The usual cause is striking an arc before the helmet is in place, or being exposed to someone else's arc. If you suspect arc eye, stop work and get medical advice. Always lower the helmet or check the filter is dark before you strike the arc.

    What is a weld and grind flip-up helmet, and when is it useful?icon-minus-redicon-plus-red

    A weld and grind helmet has a hinged front that carries the welding filter. With the front down you weld; with it lifted you see through a clear inner visor, which is useful for grinding, chipping slag and setting up between welds without taking the helmet off.

    This suits fabrication and repair work where you switch often between welding and preparation. Because the front is a moving part, check the hinge is smooth and holds its position, and that the clear visor is undamaged. Following the maker's instructions on which part protects you in each mode is important.

    See all 6 questions for this category

    Shop Similar Categories