This is for inserting behind plates where there is a taper on the backside of the plate. This tile allows the groove portion to fit snugly against the root. Note that these tiles are square-edged and will not go around a radius. They are meant for flat plates. Again, these tiles are used for M.I.G./M.A.G. welding with all the wires.
Can be used as shown below.
- Impart X-ray quality back beads on root pass
- Weld one side only
- Deposit more weld metal
- Root weld and fill in one pass
- Eliminate defects and rework
- Eliminate costly unnecessary gouging and grinding
- Sizes 1/4” (6.3 mm) to 6” (152.4 mm)
- Special sizes and configurations available
- Conveniently packaged and sealed in plastic for moisture-proof protection
- Wider heat receptive pressure sensitive foil for improved adhesion to work piece
12m - 40ft./ box
Available in 1/4” to 2” (6.3mm to 50.8mm) tiles.
| Specifications |
| A |
3/8 in
9.5 mm |
| B |
1 7/32 in
31 mm |
| C |
1 in
25.4 mm |
| D |
25/64 in
10 mm |
| E |
7/16 in
11.1 mm |
| F |
1/32 in
0.79mm |
| G |
1/4 in
6.3 mm |