SHOW PRICES INCLUDING VAT
Trustpilot
Click to visit the Rapid Blog - Supporting welders every step of the way
0Your Basket : £ 0.00
WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
4441.760 Optrel Panoramaxx Quattro Black Air Fed Welding Helmet
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 4441.760  

    Optrel Panoramaxx Quattro Black Air Fed Welding Helmet
    4441.760

    £548.72  EX VAT
    SSP Suggested Selling Price = £722.00  YOU SAVE £173.28
     Buy in 3 easy interest free payments of £182.91† with

    Related Items

    Optrel Panoramaxx Quattro with e3000X System Parts FAQs

    Hoses, lenses, chargers and carry items for a powered air welding helmet system, with tips on choosing and care.

    How do I make sure a replacement air hose is the right one?icon-minus-redicon-plus-red

    Check the system label on the blower unit and the manual, then match the hose by its part reference or by the old hose if it carries markings. Hoses differ in length, connector type and how they join the helmet, and these must suit your system.

    Do not swap in a hose from a different system just because it connects. Flow and sealing depend on the whole set working together, and the maker's approved parts are the safe choice. If you are unsure, our team can help you check the details before you order.

    How do I inspect the air hose, and when should it be replaced?icon-minus-redicon-plus-red

    Look along its full length for cuts, cracks, kinks, burnt patches and stiffness, and pay particular attention to the ends where it joins the helmet and the blower, since that is where wear tends to show first. Check the seals or gaskets at both ends are present and undamaged.

    A damaged hose can leak, reduce airflow or let spatter through, so replace it rather than patch it. Clean only as the maker's manual says, and let the inside dry fully before use or storage.

    What does an air hose protective sleeve do?icon-minus-redicon-plus-red

    It is a cover that fits over the hose to shield it from sparks, spatter, hot work and abrasion, which helps it last longer in harsh conditions. It is usually worth considering for overhead work, grinding or dragging the hose across rough floors.

    Check it is intended for your hose and fits without kinking or pulling at the connectors. A sleeve does not make a damaged hose safe, so keep inspecting the hose underneath as well, and replace the sleeve itself when it is burnt or worn through.

    How do I fit a new front cover lens properly?icon-minus-redicon-plus-red

    A maker's manual describes pressing in a side clip to release the old lens, then attaching the new one to one clip, pulling it round and snapping it into the other. The gasket needs firm pressure to seal, so check the lens sits all the way round with no gaps where spatter or dust could get in.

    Follow your own manual, as designs differ. Make sure the protective film, if fitted, is removed, and handle the lens by its edges so the surface stays clean.

    See all 6 questions for this category

    Shop Similar Categories