SHOW PRICES INCLUDING VAT
Trustpilot
Click to visit the Rapid Blog - Supporting welders every step of the way
0Your Basket : £ 0.00
WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
5000.038 Optrel Clearmaxx Poly Carbonate Clear Cover Grinding Lens (Pack of 10)
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 5000.038  

    Optrel Clearmaxx Poly Carbonate Clear Cover Grinding Lens (Pack of 10)
    5000.038

    £136.50  EX VAT
    SSP Suggested Selling Price = £182.00  YOU SAVE £45.50
     Buy in 3 easy interest free payments of £45.50† with

    Related Items

    Optrel Air Fed Helmet Spare Parts FAQs

    Practical answers on choosing and looking after the replaceable parts of a powered or supplied air welding helmet system.

    What should I check on the hose and seals before each use?icon-minus-redicon-plus-red

    Check that the hose and sealing parts are free from any visible damage, and that the hose is fitted correctly to both the blower or air source and the head part. Maker instructions for supplied and powered air equipment ask for this check before every use.

    The HSE also says respiratory protective equipment must be thoroughly inspected before each use. Look for cracks, cuts, kinks, hardened or flattened seals and loose connectors, and replace anything damaged before you weld. Do not tape or patch a damaged hose, because the protection depends on the air path being sound.

    Do replacement parts have to come from the equipment maker?icon-minus-redicon-plus-red

    For parts that affect the air path or the seal, yes, you should stay with parts the maker approves for your system. Maker manuals state that all parts of the system must be approved by the manufacturer and used in line with the instructions, and buying guides warn against unapproved filters and face seals.

    A part that looks the same may differ in size, material or flow resistance, and a poor fit can reduce the protection you rely on. Check the manual's parts list against your helmet and blower or air source, and if you are unsure, ask our team to help you match the part.

    What are a spark protector and a pre-filter for?icon-minus-redicon-plus-red

    A spark protector, or spark arrestor, sits in front of the filter intake so that sparks and hot spatter do not burn into the filter or enter the blower. A pre-filter catches the coarser dust first, which usually protects the main filter and can help battery run time.

    Both are wear items that are meant to be changed regularly. Inspect them for holes, scorching, clogging or breakthrough, and replace rather than clean them. How often depends on how much welding and grinding you do, and the manual should give the maker's guidance.

    What are sealing rings and neck straps for, and when should they be replaced?icon-minus-redicon-plus-red

    Sealing rings and similar gaskets close the joints between the hose, the head part and the air source so air flows through the filter and tube rather than leaking. Straps and neck pieces hold the hose in a comfortable position and keep it from pulling on the connection.

    Replace any seal that is cracked, flattened, hardened, torn or no longer grips, and replace damaged parts straight away because a leak or a loose hose reduces protection. Fit the new part exactly as the manual shows, and check the joint again after fitting.

    See all 6 questions for this category

    Shop Similar Categories