The Ultima Tig Cut combines the standard grinding unit on the front of the machine with a tungsten cutting module on the rear. The tungstens can be ground in the usual way and then cut to a precise length, safely and quickly without splitting the electrode. The grinder demonstrates an eco-friendly way to grind and cut perfect, accurate and repeatable angles on tungsten electrodes.
The Ultima Tig Cut is constructed with a unique, fully enclosed grinding and cutting chamber with dual dust disposal containers. This enables the machine to automatically collect all toxic dust particles, giving a healthy dust free environment for the operator and eliminating the need for separate extraction systems. The sealed container can be disposed of into landfill or returned to BH Tungsten Grinders Ltd (in accordance with HSE OC 564/6 REV).
Cold wet grinding combined with the diamond wheels high grinding speed ensures that the tungsten electrode always has a polished and even surface.
With the Ultima Tig Cut you will achieve the exact angle that you require. A special locking device positions the electrode precisely resulting in minimum waste. The grinding operation is carried out in the correct longitudinal direction along the electrode. A precise angle is not only important to the quality of the welding seams, but it also increases the number of re-ignitions between grinding, thus prolonging the electrode life.
The Ultima Tig Cut is easy to use. Place the electrode in the electrode holder. Adjust the pointer to the required grinding angle and insert the tungsten electrode into the combined stick out and locking device. After the grinding has taken place, you can if needed flatten the tip by placing the electrode clamp in the 90-degree position. The electrode can then be cut to the required length using the cutter module on the rear of the machine. Electrodes as short as 8mm are possible without splitting the electrode.
Due to the use of an electrode holder, the Ultima Tig can grind electrodes as short as 15mm with a standard electrode clamp, and 8mm with a special electrode clamp. The use of the electrode holder al so ensures a precise and concentric tip every time.
The Ultima Tig Cut is CE marked and meets all applicable EU directives.