Rapid Ref : 9873020

Kemppi Alfa e60P Welding Helmet, with 110 x 60mm Passive Shade 11 Lens and Flip Front
9873020

Name: Kemppi Alfa e60P Welding Helmet, with 110 x 60mm Passive Shade 11 Lens and Flip Front
SKU: 9873020
Price: 63.00 GBP

£63.00 EX VAT

SSP Suggested Selling Price = £78.32 YOU SAVE £15.32

Buy in 3 easy interest free payments of £21.00^† with

Shop Parts

PERFECT BALANCE AND EXCELLENT FIT

Kemppi presents its latest line of Alfa welding helmets. The e60 range is designed to appeal to welders who have preferences for suitable weight, comfort and eye protection. All Alfa models weigh about 467g and are among the most compact and lightweight face shields in Kemppi’s welding protection catalogue. The shell structure provides generous dimensions that offer excellent facial protection from arc radiation. The flip-up welding lens is perfectly positioned for pre- and post-welding inspection. A robust, cost-efficient solution for light- to medium-duty welding tasks.

Features

For welding, tacking, cutting, grinding and inspection
Flip-up welding lens with GapView setting
ComFlex headband allows the perfect fit
Optional leather neck protectors
Lightweight – only 467g
Certified to EN 175 B and AS/NZS 1337.1

Product Details

Technical specifications	Value
Welding filter type	Passive
Grind mode	No
Flip-up visor	Yes
Impact rate	EN 175 B
Operating temperature	-5 - 55 °C
Storage temperature	-20 - 50 °C
Recommended maximum humidity for use	80%
Materials	100% cotton, PA, Padding foam, plastic, PC, POM, PP
Weight without accessories	467g
Standards	EN 175 B, EN 166 B, EN 169, AS/NZS 1337.1, AS/NZS 1338.1

Brochures, Manuals & Videos

BROCHURES & MANUALS

View Brochure

Kemppi Alfa e60P, e60A / Beta e90P, e90A, e90X Declaration of Conformity

Kemppi Alfa e60P, e60A / Beta e90P, e90A, e90X, e90Xi Operating Manual

Videos

What is the new Alfa & Beta e-series for welders?

Kemppi Welding Helmets FAQs

Practical answers on choosing, using and looking after branded auto-darkening, passive and grinding welding helmets.

How do I choose the right shade for my welding process and current?

Shade depends on the process and the welding current. As a general guide, low-current TIG sits in a lighter range than stick or MIG at higher current, and cutting or brazing with a flame uses the lightest shades. Charts such as those published by welding bodies are a starting point only.

A common approach is to begin with a shade that is slightly too dark and then move lighter until you can see the weld pool comfortably, staying inside the range the chart gives. Variable-shade helmets let you adjust this job by job. Check the helmet's manual for its own shade guide.

When should I replace the front cover lens?

The clear cover lens takes the spatter and scratches so the filter behind it does not. Makers say to replace a front cover lens that is cracked, scratched or pitted, and to do it regularly rather than waiting until you cannot see through it.

A marked cover lens makes the weld harder to see and can interfere with the sensors that detect the arc. Avoid resting the helmet face-down on a bench, as this scratches the lens. Use only the replacement lenses the maker specifies for your helmet, and fit the inner cover lens as well, as the filter is designed to be used with it.

How do I clean the filter and sensors?

Clean the filter surface regularly with clean water and a lint-free or microfibre cloth. Do not use strong cleaning solutions, solvents or oil-based products, which can damage the surface. Keep the arc sensors and the solar cells clean in the same way, because dirt or spatter on them can stop the filter darkening properly or make it flicker.

The shell and headband can usually be washed with a neutral detergent. Always follow the manual for your model, as materials differ.

What is a grinding helmet and can I weld in one?

A grinding helmet is a face protector with a clear visor, built to guard against flying particles and impact when grinding or cutting. It has no welding filter, so it does not protect you from arc radiation.

Makers of grinding helmets state they are not suitable for welding, so never use one to look at an arc. If you do both jobs, you can fit a welding helmet with a flip-front or grind mode, or switch between a welding helmet and a separate grinding helmet. Check the markings and the manual to see what each is approved for.

See all 6 questions for this category

Account Menu

Last Viewed