Rapid Ref : 9873023

Kemppi Beta e90A Welding Helmet, with Variable Shade 9-13 ADF and Flip Front for Grinding
9873023

Name: Kemppi Beta e90A Welding Helmet, with Variable Shade 9-13 ADF and Flip Front for Grinding
SKU: 9873023
Price: 166.00 GBP

£166.00 EX VAT

SSP Suggested Selling Price = £206.80 YOU SAVE £40.80

Buy in 3 easy interest free payments of £55.33^† with

Shop Parts

BETTER VISIBILITY, BETTER PROTECTION

Kemppi presents its latest line of Beta welding helmets. The e90 range is designed for professional welders who want a comfortable fit and reliable eye protection. Weighing from approximately 473g to 525g depending on the model, the Beta range delivers exceptional comfort without compromising protection. As some of the lightest face shields in Kemppi's welding protection catalogue, these models are designed for extended use, with generously sized shells that offer outstanding eye protection from arc radiation and increased side coverage for enhanced safety. The flip-up welding lens is perfectly positioned for pre- and post-welding inspection. A robust, cost-efficient solution for light- to medium-duty welding tasks.

Features

For welding, tacking, cutting, grinding and inspection
Flip-up welding lens with GapView stage position
ComFlex headband allows the perfect fit
Optional leather neck protectors
Lightweight – from only 473g (depending on model)
SA 60B LiFE+ Colour ADF with 60cm² viewing area
Certified to EN 175 B

Product Details

Technical specifications	Value
Welding filter type	SA 60B
ADF view size (mm)	100 x 60
ADF switching time	0.1 ms
ADF light state	3.5
ADF shade range	9 - 13
ADF sensors	3
ADF UV/IR protection	At all times
ADF battery type	2 x CR2032
ADF remote control	No
ADF classification	1/1/1/1
Grind mode	Yes
Flip-up visor	Yes
Impact rate	EN 175 B
Operating temperature	-5 - 55 °C
Storage temperature	-20 - 50 °C
Recommended maximum humidity for use	80%
Materials	100% cotton, PA, Padding foam, plastic, PC, POM, PP
Weight without accessories	505g
Standards	EN 175 B, EN 166 B, EN 379, AS/NZS 1337.1, AS/NZS 1338.1

Brochures, Manuals & Videos

BROCHURES & MANUALS

View Brochure

Kemppi Alfa e60P, e60A / Beta e90P, e90A, e90X Declaration of Conformity

Kemppi Alfa e60P, e60A / Beta e90P, e90A, e90X, e90Xi Operating Manual

Videos

What is the new Alfa & Beta e-series for welders?

Kemppi Welding Helmets FAQs

Practical answers on choosing, using and looking after branded auto-darkening, passive and grinding welding helmets.

How do I choose the right shade for my welding process and current?

Shade depends on the process and the welding current. As a general guide, low-current TIG sits in a lighter range than stick or MIG at higher current, and cutting or brazing with a flame uses the lightest shades. Charts such as those published by welding bodies are a starting point only.

A common approach is to begin with a shade that is slightly too dark and then move lighter until you can see the weld pool comfortably, staying inside the range the chart gives. Variable-shade helmets let you adjust this job by job. Check the helmet's manual for its own shade guide.

Does an auto-darkening helmet still protect my eyes when the filter is clear?

Yes, in a correctly working filter. The clear (light) state is only a low shade for seeing the work before you strike the arc. Auto-darkening filters are designed to block ultraviolet and infrared radiation at all times, whether the filter is light or dark, and makers state this in their data sheets.

That protection does not make it safe to look at an arc through a filter that has failed to darken. If the filter ever stays light when you strike an arc, stop welding, close your eyes and check the helmet before carrying on. See the manual for what to do if it fails to switch.

How do I clean the filter and sensors?

Clean the filter surface regularly with clean water and a lint-free or microfibre cloth. Do not use strong cleaning solutions, solvents or oil-based products, which can damage the surface. Keep the arc sensors and the solar cells clean in the same way, because dirt or spatter on them can stop the filter darkening properly or make it flicker.

The shell and headband can usually be washed with a neutral detergent. Always follow the manual for your model, as materials differ.

Does a welding helmet protect me from welding fume?

No. A standard welding helmet protects the eyes and face from radiation and spatter, but it is not respiratory protection. Welding fume is controlled first by removing or reducing it at source, and local extraction close to the weld is the main recommended control. Breathing equipment is normally a last resort or an additional safeguard, not the primary control.

If extraction cannot control the fume, a helmet combined with a powered air unit may be one way to add protection. Your risk assessment should decide what is needed.

See all 6 questions for this category

Account Menu

Last Viewed