WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : CK-2GL  

    CK Gas Lens
    CK-2GL

    Select Option 
    Prices From £5.82 ex VAT

    CK 2 Series Gas Lens Parts FAQs

    Gas lens bodies, cups, collets and related parts for this torch type, and how to pick and look after them.

    What does a gas lens do that a standard collet body does not?icon-minus-redicon-plus-red

    A standard collet body sends shielding gas out through a ring of small holes. A gas lens makes the gas pass through fine mesh screens first, which gives a smoother, less turbulent flow and a more even coverage pattern at the weld.

    Makers describe the benefits as reduced turbulence, better gas coverage and the ability to run more tungsten stick-out. The practical gain is clearest when you need to reach into corners or want a longer electrode for visibility. With a short stick-out the difference can be hard to see, so a gas lens is a useful upgrade rather than a must-have for every job.

    What parts make up a gas lens set-up?icon-minus-redicon-plus-red

    A gas lens front end normally consists of the gas lens body itself, a cup made for it, a collet to grip the tungsten, a heatshield (insulator) and a backcap with its O-ring. The gas lens takes the place of the standard collet body, while you still need a matching collet.

    Because these parts are designed to work together, treat the set as a system. Mixing a gas lens with the wrong cup or collet can leave a poor seal or a poor grip on the electrode. Check the parts list in your torch manual to see which items belong with your torch type, and replace worn items in the set together where practical.

    How do I choose the right size of gas lens and collet?icon-minus-redicon-plus-red

    Choose by tungsten diameter and by torch type. The size of the collet and the gas lens is set by the diameter of the electrode, so an electrode of a given diameter needs a gas lens and collet marked for that same diameter. The torch type also matters, because the head thread and body length differ between torch types.

    Check the size marking on the old part and compare it with the chart in your manual, which normally lists the electrode diameters and the matching parts. Do not try to force an electrode into a collet of a different size: a poor grip causes a bad arc and heat build-up at the contact. If you change electrode diameter often, keep a matching set for each size.

    Which cup fits a gas lens, and does cup size matter?icon-minus-redicon-plus-red

    Cups for gas lenses are not the same as cups for standard collet bodies. The two bodies have different sizes and thread patterns, so each needs its own cup. Always order a cup made for the gas lens, not just one with the right opening size.

    The cup opening affects coverage: a larger opening gives broader gas coverage, while a smaller one gives better access to tight spots. Larger-diameter electrodes run at higher current and normally go with larger cups. Pick the smallest cup that still covers the weld well. A larger cup can block your view or restrict access, and a gas lens is often paired with a bigger cup to take full advantage of the smoother flow.

    Shop Similar Categories