SHOW PRICES INCLUDING VAT
Trustpilot
Click to visit the Rapid Blog - Supporting welders every step of the way
0Your Basket : £ 0.00
WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
CK-CK2312SF CK 230 2 Series Water-Cooled 300 Amp TIG Torch with 3.8m Superflex Cables, G3/8 Machine Connections
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : CK-CK2312SF  Mfr Ref : CK2312SF

    CK 230 2 Series Water-Cooled 300 Amp TIG Torch with 3.8m Superflex Cables, G3/8" Machine Connections
    CK2312SF CK-CK2312SF

    £161.26  EX VAT
    SSP Suggested Selling Price = £293.20  YOU SAVE £131.94
     Buy in 3 easy interest free payments of £53.75† with
    Shop Parts

    CK230 water-cooled 300 amp ACHF or DCSP @ 100%, 20.9cm (8.25"), 106gm, 2 series head accessories.

    Product Details

    CK Fail Safe Water Connector
    • Heavy Duty 300amp 100% duty cycle torch
    • Uses Series 2 consumables
    • Larger water jacket design runs cooler
    • Fully achieve 3.2mm tungsten electrode capability on thick aluminium joints
    CK Superflex Cable Fitted with CK's Superflex Cable
    • Lightest most flexible cable assemblies available
    • Available for all gas-cooled or water-cooled torches
    • Lightweight silicon rubber hose with nylon over braid protection to resist abrasion
    • Replaces heavy, stiff cables increasing range of motion
    • Stays flexible even in the coldest environments
    • Great for intricate precise welding applications
    CK Superflex Leads CK Colour Coded Superflex Cable
    • 3/8" gas fittings
    • Colour-coded leads for quick identification
    • Black argon hose
    • Blue water hose
    • Red power cable

    For parts for this torch Click Here.

    Brochures & Manuals

    BROCHURES & MANUALS
       View Brochure

    Related Items

    CK230 TIG Torch Packages FAQs

    Practical answers on choosing, setting up and looking after a complete water-cooled TIG torch package.

    Is a gas lens worth having on a water-cooled TIG torch?icon-minus-redicon-plus-red

    A gas lens replaces the standard collet body with one that holds fine mesh screens. These smooth the shielding gas into a more even, laminar flow, where a standard collet body simply has side ports. That helps most when you need a longer tungsten stick-out, for example to reach into a joint, and it suits critical or high-quality welds.

    On short stick-out and non-critical work you may see little difference. A gas lens needs the matching collet, cup and collet body for your torch series, so check the parts list in the manual before ordering.

    Which tungsten electrode should I use, and is thoriated still advisable?icon-minus-redicon-plus-red

    Ceriated or lanthanated electrodes are generally accepted alternatives to thoriated ones, especially on DC, while zirconiated is usually preferred for AC. Thoriated electrodes are slightly radioactive, and the main hazard is the fine dust made when grinding the tip. Where thoriated electrodes are used, grind them on a dedicated wheel with local dust extraction, and keep eating and drinking away from the grinding area.

    Choose the diameter to suit your welding current, following the electrode maker's guidance. Too small an electrode overheats and erodes, and too large a one can make starting and arc stability worse.

    Are there special electrical precautions with high-frequency arc starting?icon-minus-redicon-plus-red

    Yes. A high-frequency start adds a high-voltage pulse on top of the machine's open-circuit voltage to ignite the arc. It can pass through gloves, tape and thin screens, so never assume that a repaired or taped torch is safe.

    Switch the power source off before changing the tungsten or the gas nozzle, so an accidental press of the torch switch cannot start the arc. Wear dry, undamaged leather gloves and insulating footwear, keep your body out of the welding circuit, and avoid working in damp conditions. Do not use a torch with damaged insulation. Follow the machine manual and your risk assessment.

    Do I need eye and lung protection for TIG welding even though there is little visible fume?icon-minus-redicon-plus-red

    Yes. The arc gives off ultraviolet and infrared radiation that can cause arc eye, a painful injury to the front of the eye that often appears a few hours after exposure. Use a welding helmet or shield with a filter that meets the relevant British and European standards, and screen the area so bystanders are protected too.

    TIG produces little visible fume, but ozone can irritate the airways, particularly when welding stainless steel and aluminium. The HSE advises using suitable extraction and, where fume is not fully controlled, respiratory protective equipment. Your risk assessment should decide the right controls.

    See all 6 questions for this category

    Shop Similar Categories