SHOW PRICES INCLUDING VAT
Trustpilot
Click to visit the Rapid Blog - Supporting welders every step of the way
0Your Basket : £ 0.00
WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
E1FL5012 4 1/4 x 2 (108mm x 50mm) Lens. Shade 12
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : E1FL5012  

    4 1/4" x 2" (108mm x 50mm) Lens. Shade 12
    E1FL5012

    £0.30  EX VAT
    SSP Suggested Selling Price = £0.63  YOU SAVE £0.33

    4 1/4" x 2" Shade 12 Lens

    Related Items

    Lenses FAQs

    Answers to common questions about welding helmet filter lenses and cover lenses, from shade numbers to fit and fogging.

    What do the shade numbers on a welding lens mean?icon-minus-redicon-plus-red

    The shade number tells you how dark the filter is. The higher the number, the darker the lens and the less light passes through it. Low numbers are used for lighter tasks such as gas welding and brazing, while higher numbers are used for arc welding and arc cutting.

    The number alone is not the whole story. The right shade depends on the process, the current and how bright the arc is, so always check the shade chart that comes with your helmet or filter, or ask our team to help you choose.

    What is the difference between a filter lens and a cover lens?icon-minus-redicon-plus-red

    The filter lens is the dark lens that actually protects your eyes from the arc. A cover lens is a clear, replaceable plate fitted in front of it (and sometimes behind it) to take the spatter, scratches and grime so the filter stays in good condition.

    Cover lenses are not a substitute for a filter and are not dark. They are normally the part you replace most often, and they should be changed when they are scratched, pitted or hazy enough to hamper your view.

    Does an auto-darkening lens still protect my eyes when it is not darkened?icon-minus-redicon-plus-red

    Yes. Auto-darkening filters are built with a permanent ultraviolet and infrared protective layer, so that protection is present in the light state and does not depend on the electronics or the battery. Makers state this in their data sheets.

    That said, the lens must still darken properly when the arc strikes. Test it before welding, replace the battery or cell as the manual describes, and stop using the lens if it does not darken reliably, is damaged or flickers. Do not rely on a faulty lens.

    What shade of lens is used for gas welding, brazing and flame cutting?icon-minus-redicon-plus-red

    These processes use much lighter filters than arc welding. Gas welding, brazing and flame cutting use the lighter end of the shade scale, with the shade rising with the size of the flame or the oxygen flow, while arc welding and arc cutting use darker filters that rise with the current.

    Use the shade given in the maker's chart or the welding filter standard for your task and flame size. Shade charts often allow the next lighter or darker shade within the recommended range if the conditions call for it, but do not go lighter just to see better.

    See all 6 questions for this category

    Shop Similar Categories