WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : VP0.5  

    Key Plant Small Positioner, 500Kg
    VP0.5

    £7854.00  EX VAT
     Buy in 3 easy interest free payments of £2618.00† with

    The perfect automated solution for lifting, tilting and rotating workpieces of various capacities, shapes and sizes 360°. Our cost-effective, robust and reliable LCVP range of positioners are designed to significantly increase the quality and consistency of your weld, by hand and automation. 

    Brochures & Manuals

    BROCHURES & MANUALS
       View Brochure

    Weld Positioning Equipment FAQs

    Straight answers to the questions people ask most when choosing and using a welding positioner.

    How do I choose the right capacity for a positioner?icon-minus-redicon-plus-red

    Capacity is the weight of work a positioner is rated to carry, but the rating depends on how the load sits on the table. A load centred on the axis of rotation is the easy case. If the centre of gravity is offset from the centre, or the table is tilted, the positioner can safely carry less.

    The maker normally gives ratings for different offsets and angles, so check these against your heaviest and most awkward workpiece, and allow a good margin. Remember to include any fixtures, chucks and clamps in the weight.

    What is the difference between a rotary positioner and a tilt-and-rotate positioner?icon-minus-redicon-plus-red

    A rotary positioner turns the work about one axis. If the table is fixed flat, it suits round parts welded around the circumference, such as pipe, tube and discs. A tilt-and-rotate positioner can also tilt the table, so you can bring awkward joints into a flat or near-flat position and reach more of a complex fabrication.

    Some rotary positioners can be tilted by hand or by motor. Choose the simpler type if your work is mainly round parts, and a tilting type if you weld varied shapes.

    What is a hollow centre or through hole in a positioner for?icon-minus-redicon-plus-red

    A positioner with a hole through the centre of the table lets the work pass through, or lets you feed cables, hoses and gas lines through. It is useful for long pipes and shafts that extend through the table, and for supplying a purge gas to the inside of pipework while you weld.

    If your work is long or you need to purge the inside of a pipe, choose a positioner with a hole large enough for what you need to pass through it.

    How do I hold the work on a positioner?icon-minus-redicon-plus-red

    Work can be held with a chuck, clamps, bolted fixtures, or purpose-made tooling. A self-centring chuck suits round parts such as pipes and bars, and a quick-action chuck makes loading and unloading faster. T-slotted tables allow clamps and fixtures to be bolted down.

    Whatever you use, the work must be held securely and as close to the centre as possible, because the turning load can throw the part off if it is loosely held. Check the grip each time, and make sure fixtures are heavy enough for the work and heat.

    Shop Similar Categories