WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : CK-46V28RSF  Mfr Ref : 46V28RSF

    CK 26 Superflex Power Cable with G3/8" Machine Connection. 4m
    46V28RSF CK-46V28RSF

    £132.04  EX VAT
    SSP Suggested Selling Price = £264.08  YOU SAVE £132.04
     Buy in 3 easy interest free payments of £44.01† with

    CK TrimLine TL26 FAQs

    Answers for choosing, fitting and looking after a mid-range gas-cooled TIG torch and its consumables.

    Is an air-cooled torch rated around 200 amps enough for my work?icon-minus-redicon-plus-red

    Air-cooled torches are common for work at or below about 200 amps, and they rely on the surrounding air and the shielding gas to carry heat away. They are simpler than water-cooled torches and need no separate cooling unit.

    The rating only means something with its duty cycle. Duty cycle is measured over ten minutes, so a 60% rating means about six minutes of welding and four minutes of cooling. Running above the rating heats the handle and cable faster and the duty cycle drops. For long, high-current welding a water-cooled torch is usually the better choice. Check the data plate and manual.

    What does a gas lens do, and is it worth fitting?icon-minus-redicon-plus-red

    A gas lens replaces the standard collet body and uses a series of metal screens to diffuse and spread the shielding gas, giving a smoother flow that reaches further from the cup. It is generally recommended for DC welding because it improves weld quality and can let you use less gas, and it is less important for AC aluminium.

    It also lets you use a longer tungsten stick-out, which helps get into corners and around joints. A gas lens is often used with larger cups. Gas-saver style kits bundle the lens body, collets and cups together; make sure the kit is for your torch series.

    How do I make sure a cup, collet or other consumable fits my torch?icon-minus-redicon-plus-red

    Torches come in families, often called series, and parts are not interchangeable between them. A cup made for one torch style will not necessarily fit another, so you need to know your torch style before ordering.

    Check the series on the torch body or in the manual, then match the collet to the tungsten diameter and the collet body or gas lens to the torch series. Cups, collet bodies, back caps and heat-related parts are normally sized for a particular series. If in doubt, our team can help you identify the correct part.

    What ventilation do I need when TIG welding?icon-minus-redicon-plus-red

    The HSE says welding fume, including irritating gases such as ozone, may cause respiratory irritation and metal fume fever, and that ozone in particular can affect TIG welders working on stainless steel and aluminium. For regular or intensive TIG welding, HSE guidance is local exhaust ventilation, with respiratory protective equipment as well where that alone is not enough.

    HSE guidance says that even for occasional welding (less than once a week and under an hour), respiratory protective equipment and good general ventilation should be provided, and that open doors and windows are not usually sufficient. Your COSHH assessment should decide the controls for the material and the work.

    Shop Similar Categories