The website is working fine. Please feel free to place orders. WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 0700000048  

    ESAB Albatross 4000X Visor Screw Kit (Pack of 2)
    0700000048

    £4.31  EX VAT
    SSP Suggested Selling Price = £5.74  YOU SAVE £1.43

    ESAB Albatross 4000X Parts FAQs

    Spare lenses, filter cassettes, headgear and fixings for a passive or auto-darkening welding helmet: what wears and how to buy the right one.

    Is it safe to keep welding with a scratched or damaged helmet part?icon-minus-redicon-plus-red

    Welding arcs give off ultraviolet and infrared radiation as well as bright light. Arc eye is an acute injury to the front of the eye that usually shows a few hours after exposure, so harm can be done before you notice anything.

    A scratched or pitted cover lens should be replaced. If the filter is cracked, damaged or does not darken when you strike an arc, stop welding at once and contact the supplier or maker, because the filter is not something to repair yourself. Stop using a helmet if a fault cannot be corrected. Follow your helmet manual and your risk assessment.

    How do I find the right cover lens for my helmet?icon-minus-redicon-plus-red

    Manuals list the front lens and the inner lens as separate parts, and the filter is only to be used with its inner lens in place, so check which one you need. Use the replacement parts your manual specifies, because lenses that look similar can sit badly or leave gaps.

    Check the manual or the markings on the helmet for the model, then match the shape and overall size of the old lens. If you cannot find a part number, measure the width and height in millimetres and note the type of filter fitted. Our team can help you choose if you send the helmet model and a photo.

    What do the markings on helmet spares mean?icon-minus-redicon-plus-red

    The markings on a helmet part show what standard it was made and tested to. Standards for eye and face protection have been updated over the years, so older and newer parts may carry different markings. The welding-specific requirements are covered by their own part of the standard for protectors used for welding and related techniques.

    Products certified to an earlier standard may still be in use, so whether an older item is still suitable is a matter for the maker's guidance and your risk assessment. When buying spares, use the parts the maker specifies for your helmet, and check the markings and manual. Ask the maker if you are unsure.

    Can I replace the auto-darkening filter cassette myself?icon-minus-redicon-plus-red

    Whether the filter can be taken out depends on the helmet design, so check the manual. Never open or tamper with the filter, because there are no user-serviceable parts inside, and do not modify the filter or helmet unless the manual allows it. Only use replacement parts the manual specifies.

    Choose a cassette listed for your helmet, because fit and fixings differ between shells. After fitting, keep the sensors and solar cells clean and use the test button, if there is one, to check that it darkens before you weld. If a filter does not darken when you strike an arc, stop welding at once.

    Shop Similar Categories