WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE

ESAB G50 Helmet Parts

ESAB G50 Helmet Parts FAQs

Practical answers on the spare parts for this type of auto-darkening welding and grinding helmet: lenses, filter cassette, headgear and shell.

How do I work out which spare part fits my helmet?icon-minus-redicon-plus-red

Start with the maker's manual. Helmet manuals normally include a parts list and an exploded drawing, with each part described and numbered, so you can match the part to the item you want to replace. Check the helmet's own markings too, often found on the shell or the filter, and note the part number on the old part if it has one.

Some parts are common to several helmets in a range, while others are specific to one version of the helmet, so confirm before ordering. Makers state that replacement parts other than those they specify can put the wearer at risk.

When should I replace the front cover lens?icon-minus-redicon-plus-red

Replace it when it is cracked, scratched, pitted or built up with spatter. A maker's manual says damaged surfaces, even on protection plates, reduce vision and impair protection, and tells users to check the helmet regularly before work.

The front lens takes the spatter so that the filter behind it does not have to, so it is a consumable. On an auto-darkening helmet, a dirty or damaged front lens can also be a reason why the filter flickers or does not darken as it should, so it is worth checking first when that happens.

What does the inner cover lens do and do I need it?icon-minus-redicon-plus-red

The inner cover lens sits between the filter and your face. A maker's manual states that the auto-darkening filter must only be used together with the inner cover lens, and that the filter must stay between the outer and inner protective lenses.

So it is not an optional part. Inspect it with the rest of the stack, and replace it if it is cracked, scratched or too dirty to see through. When you refit parts, put them back in the same order they came out.

How do I fit a new front cover lens?icon-minus-redicon-plus-red

Check the manual for your helmet, as the method varies by design. On this type of helmet the lens is normally held by a clip or retainer that you reach from the inside of the shell. Release it, take out the old lens and fit the new one the same way round, noting how any gasket sat before you remove it.

Peel off any protective film from the new lens first, as a film left on can stop the filter reacting properly. Do not use the helmet without the front lens fitted, as it is there to take the spatter and keep the filter and sensors clean.

Can I replace the auto-darkening filter cassette myself?icon-minus-redicon-plus-red

You can swap the whole cassette for the type your helmet's maker specifies, following the manual, but you should never open or tamper with the filter itself. Makers state this plainly, along with a warning not to use replacement parts other than those they specify.

If the filter does not darken when you strike an arc, stop welding immediately and contact your supervisor or dealer. Before assuming the cassette has failed, check the front cover lens, the sensors and the sensitivity setting, and, depending on the model, the power supply.

What should I check on the headgear before buying a replacement?icon-minus-redicon-plus-red

First check whether it is only out of adjustment. Maker manuals describe several adjustments, including head height, head size, how far the helmet sits from your face and the angle of the helmet, and list a slipping helmet as a sign that the headgear is not properly adjusted.

Replace it if parts are cracked, worn or no longer hold their setting. Check the part number against the manual, as headgear is often shared between helmets in a range but not always. Never fit a headgear that lets the helmet tip or drop while you work.