CK Flex-Loc 230 / 250 Torch Parts FAQs
Heads, bodies, handles, cables, hoses and seals for a water-cooled lockable-head TIG torch: how to pick the right part and look after it.
How do I work out which head or body fits my torch?

Heads and bodies are made in different size classes tied to the torch rating, so they are not interchangeable between classes unless the maker says so. Find the torch model on the handle, body or paperwork, then look it up in the maker's parts list. It shows which head goes with which heatshield and screw, and which body comes with which O-rings.
Also check the cooling type: water-cooled and gas-cooled bodies are listed as different parts, so do not assume a body that screws on is the right one. If the model is unclear, our team can help you work it out from the old part.
What do the head adjustment stem and its O-ring do?

The adjustable head is held at your chosen angle by a stem or screw that locks the neck, and it carries an O-ring. Makers supply the stem with its O-ring as one part, and it comes fitted to a new head. If a head will not hold its angle, turns stiffly or weeps, look at the stem and O-ring first.
Heat can damage the stem, for example if the torch is rested on hot metal or used hard on aluminium, and how long it lasts depends on use. Let the head cool before adjusting it, fit the stem listed for your head size class, and tighten it as the manual directs.
How do I choose a replacement power cable or water hose?

First be clear which part you need. The power cable carries the welding current and, on many torches, the returning coolant, while the water hose carries coolant to the torch. Do not swap them over when reconnecting.
Then match the details in the maker's parts list: the length, whether you want the standard or the more flexible version, and the connector style and thread at the machine end. Some fittings have left-hand threads, so a connector that looks right may not fit. Use a power cable that is correctly sized for the torch rating, as the maker warns against under-sized or badly joined cables.
Should I replace one cable or hose, or the whole set?

Makers list the power cable, water hose and gas hose separately, and also sell combined sets of two or three pieces. If only one piece is cut or leaking, replacing that piece is usually reasonable.
If a power cable has overheated, find out why before fitting a new one. Low coolant flow, a kinked or clogged hose or a faulty cooler are the usual suspects, and fitting a new cable without fixing the cause may damage it as well. Where the cable and hoses are of similar age and condition, replacing them together can save a repeat job.