0 items in your basket
Total £ 0.00 EX VAT
SHOPS
Special Buys/Offers
Rapid Merchandise Shop
PATON Shop
GoGrid Shop
GasiQ Shop
CK Shop
Furick TIG Shop
GPPH Shop
Kemppi Shop
Spiderhand Shop
Optrel Shop
3M Shop
Plymovent Fume Extraction
Miller Shop
Elga Shop
CEPRO Shop
Bohler Welding Shop
SFE Shop
Hypertherm Shop
Lincoln Electric Shop
ESAB Shop
Fronius Shop
HMT Shop
Gullco Shop
FEIN Shop
SAIT Shop
Harris Shop
FANUCI & FALCON Shop
Jackson Safety Shop
Key Plant Automation Shop
Orbitalum Shop
Bessey Shop
Bester Shop
EWM Shop
MACHINES
Welding Machine Offers
Arc Welders
MIG Welders
TIG Welders
Plasma Cutters
Air Compressors
Engine Driven Welders
Battery Power Supplies
Generators
Fume Extraction
Sub Arc Machines
Weld Positioning Equipment
Cutting Equipment
Spot Welders
Stud Welders
Used Machines
LC Laser Shop
ARC
MMA Electrodes
Cable Sets
Earth Clamps
Electrode Holders
Cable Connectors
Welding Cable
Welding Helmets
Arc Accessories
Rod Ovens
Learning
Exothermic Cutting
Chemical Aids
Gouging
MIG
MIG Filler Wire
MIG Torches & Parts
Site Wire Feeders
MIG Regulators
Ceramic Backing Tiles
MIG Accessories
TIG
TIG Torches
TIG Torch Parts
Tungsten Electrodes
TIG Filler Wire
Machine Remotes
TIG Accessories
Cold Wire Feeders
TIG Gauntlets
Tung Buddy
Tungsten Sharpening
Weld Cleaning
Gas Purging Tools
LASER
Laser Welders
Laser Cleaners
Laser Accessories
PLASMA
Plasma Torches
Plasma Torch Consumables
Lincoln Cutting Tables
GAS
Cutting & Welding Outfits
Gas Regulators
Flashback Arrestors
Gas Hoses & Fittings
Gas Torches
Gas Cutting Nozzles
Gas Welding & Heating Nozzles
Gas Accessories
Gas Welding & Brazing Rods
Gas Bottle Trolleys
Gas Cutting Machines
Quick Action Couplings
Regulator Accessories
Gas Analysers
SAFETY
Helmet Spares
Air Fed Welding Helmets
Swiss Air System
Goggles
Welding Blankets
Spectacles
Visors
Welding Curtains
Ear Protection
Safety Helmets
Monkey Masks
Gloves
Caps & Hoods
Leather Welding Clothing
Overalls
Weldline Female PPE
Disposable Masks & Respirators
WORKSHOP
Build your own GPPH Welding Table
Magnetic Drilling
Rapid Pipe Shop
Bevelling Machines
Automation
Metal Markers
Inspection Equipment
Pipework Equipment
Site Equipment
Exact Pipe Cutting Machines
Welding Rotators
Welding Tables
Bandsaws & Blades
TORCH &MACHINE SPARES
Pipe Cutting Machine Accessories
Parts for CO2 Laser
Kemppi MIG Parts
Machine Parts
Plasma Welding Torches
Water Coolers
Binzel MIG Parts
Tungsten Grinder Parts
WIRE, FLUX & RODS
Brazing Flux
Sub Arc Wire & Flux
ABRASIVES
3M Abrasives
SAIT Abrasives
Spectre Abrasives
Other Brand Abrasives
Backing Pads
Finishing & Polishing Products
Wire Brushes
Abrasive Belts
TOOLS
Angle Grinders
Right Lines Tool Offers
Magnetic Tools
Welding Clamps
Pipe Fit Up Tools
Site Storage
Orbitalum Pipe Machines
Orbitalum GF Sawblades
KNOWLEDGECENTRE
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Accessories and spares for an AC/DC TIG inverter welder: cooling units, remote controls, torch necks, adaptors, trolleys and software options, and how to choose the right ones.
Start with the data plate on the machine and its manual, which list the model, the connections it has and the accessories that are approved for it. Note the torch connection type, the remote control socket and whether the machine has a built-in or separate cooling unit.Then compare these details with the part's description and part number. Trolleys, cases, cooling units, remote controls and torch parts often look similar but differ in fit or connectors. If a part is for a different series, it may not connect or work as intended, so check before ordering and ask our team if unsure.
A cooling unit is needed to run a water-cooled torch, which suits sustained or high-current work. Gas-cooled (air-cooled) torches are lighter and fine for intermittent work at moderate current, but they heat up as the current and arc time rise. A water-cooled torch keeps its handle and head cooler and can be rated for continuous use at higher current.Whether you need one depends on your usual current, how long the arc runs and the torch rating. Check the torch's rated current at 100 percent duty cycle, not just the headline figure, and follow the machine's manual.
Use only the liquid the machine and cooler maker specify. A mix of inhibited coolant and distilled water is common, but follow your manual. Car antifreeze can clog the narrow torch passages because of its additives, and hard tap water is best avoided because minerals can scale up the torch and radiator.Check the level and the condition of the coolant regularly, and replace it if it looks cloudy, discoloured or contains particles. Low flow can overheat and damage the torch, so keep hoses free of kinks and do not run the unit dry. The manual gives the correct fluid and change interval.
Torches and machines come with different connection styles, so an adaptor lets a torch fit a machine it was not made for. A gas-through adaptor passes shielding gas through the power connection, which is useful when the machine has a combined power and gas socket and the torch has a separate gas hose fitting.Before buying, check the machine's socket, whether the torch is gas-cooled or water-cooled, and the thread type on the torch. Fit connectors firmly as the manual describes, without over-tightening, and join the right hoses to the right ports, as crossed or loose connections can cause leaks and overheating.
A pedal or hand remote acts as a remote current control. You set the maximum current on the machine and the pedal varies the output up to that limit, much like a car accelerator. Releasing it lowers the current and ends the weld. Many also work as the arc start switch.The machine usually has to be set to remote operation before it responds, which is done in its menu or by the method in the manual. A pedal with a wired lead suits a fixed bench, while a hand remote on the torch suits positions where the foot cannot reach.
Remote sockets are not universal. Plugs differ in pin count and wiring, and some machines need a particular control panel or adaptor before a remote works. Check the socket type on the machine, the connector on the remote and the compatibility list in the machine's manual.If a remote is not responding, make sure the plug is fully seated, look for bent pins, and check the machine is set to remote mode. Trying the remote on another compatible welder can show whether the fault is in the remote or the machine.