WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE

Gullco KAT Carriages

Gullco KAT Carriages FAQs

Answers to common questions about track-mounted automation carriages for welding and cutting.

What is the difference between rigid track and flexible track carriages?icon-minus-redicon-plus-red

A rigid track carriage runs on a straight, non-bending rail and suits flat work and straight seams. A flexible track carriage runs on a rail that can be bent to follow a gentle curve, such as the side of a tank or a large-diameter pipe.

Each flexible track has a minimum bending radius set by the maker, and going tighter than that can upset stability and torch movement or even damage the track.

Check the track type, the curvature of your work and the carriage load against the maker's data sheet before choosing.

How is a track-mounted carriage held to the workpiece?icon-minus-redicon-plus-red

Track is usually fixed to the work with magnetic units or vacuum units, depending on the material. Magnetic mounting works only on ferromagnetic material such as carbon steel. On stainless steel and aluminium, where magnetic grip is not possible, vacuum mounting is needed.

A secure mount matters even more for out-of-position runs, because the fixings carry the whole carriage and torch load. Always follow the maker's instructions for the fixing method and weight limits, and check the track cannot shift before you start travelling.

What track should I use for vertical or overhead welding?icon-minus-redicon-plus-red

Out-of-position work increases the forces on the carriage, including the downward pull and the torque during starts, stops and direction changes. Makers recommend rigid track with magnetic or vacuum mounting for these positions, as it is stable and holds its shape.

Some lighter track profiles are not suitable for vertical or overhead use at all, so check the track data sheet for the positions it is intended for. Confirm the weight limits for your carriage and torch before you start.

How does travel speed affect the weld?icon-minus-redicon-plus-red

Travel speed is one of the main factors in how much energy goes into each length of weld. Heat input rises with current and voltage and falls as travel speed increases, so slower travel puts in more heat per unit length and faster travel puts in less. That affects bead size, penetration and distortion.

The right speed is normally set by the welding procedure for the job, together with the process, joint and material, and not chosen by eye. A carriage holds the speed steady along the seam, which helps repeatability. Record the settings that gave a good result so they can be repeated.

Why use a carriage instead of welding by hand?icon-minus-redicon-plus-red

A carriage moves the torch at a steady, adjustable speed along the seam. By hand, travel speed tends to vary, especially as the operator tires, which can cause uneven beads. Makers and users report that constant speed is key to repeatable weld quality and less rework.

It also lets the operator concentrate on torch angle, stick-out and watching the arc. It is not right for every job, since joints that are short, awkward or highly irregular are often better done by hand, and the set-up still needs a competent operator who follows the procedure.

Do I still need fume extraction when a carriage does the welding?icon-minus-redicon-plus-red

Yes. Moving the torch by carriage does not remove the fume. All welding fume, including from mild steel, can cause cancer, so when welding indoors use local extraction at the weld, with respiratory protection where your risk assessment says extraction alone is not enough. Respiratory protection is also expected for outdoor welding.

A carriage can help because the operator can stand further back, but the extraction still has to capture fume at the arc. Position it with your risk assessment in mind.