WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 108020-0260-P10  

    HMT CarbideMax 55 TCT Magnet Broach Cutter 26mm (Pack of 10)
    108020-0260-P10

    £615.40  EX VAT
    SSP Suggested Selling Price = £724.00  YOU SAVE £108.60
     Buy in 3 easy interest free payments of £205.13† with

    Related Items

    HMT Bulk Cutter Products FAQs

    Answers for buyers of multi-pack carbide-tipped annular cutters and hole cutters for magnetic drilling machines.

    Should I choose HSS or carbide-tipped (TCT) cutters?icon-minus-redicon-plus-red

    High speed steel (HSS) cutters are the general-purpose choice and can be resharpened. Carbide-tipped (TCT) cutters have tungsten carbide inserts brazed onto the cutting edges and are generally chosen for harder materials and longer life, which is why they suit repeat work in bulk.

    TCT is less forgiving of a slow or unsteady spindle, because the carbide edges can chip. Check the lowest speed your drill can hold for the diameter you want, and follow the cutter maker's recommended speed and feed for the material.

    How do I choose the cutting depth?icon-minus-redicon-plus-red

    The cutting length is the maximum material thickness the cutter can go through. Pick a depth that clears the plate or section you drill most often, with some margin, rather than the shortest cutter that just reaches.

    If you drill several thicknesses, a multi-pack of one depth sized for your thickest job keeps things simple. Remember that deeper cuts make it harder for swarf to clear, so use the coolant and a steady feed.

    Why must I always use a pilot pin, and does it have to match the cutter?icon-minus-redicon-plus-red

    The pilot pin centres the cutter on your mark and pushes the slug out as the cut finishes. Cutters should not be run without a pilot pin, and the arbor should have an ejection spring.

    Pin length, diameter and spring travel often differ between cutter ranges, so use a pin recommended for the cutter series you are using, and keep spare pins with the cutters. A bent, sticky or worn pin is a common reason for slugs that will not eject, so replace it rather than forcing it.

    How much coolant or cutting fluid do I need?icon-minus-redicon-plus-red

    Cooling and lubrication greatly extend cutter life, so make sure fluid is reaching the cutting edges before every cut. Many magnetic drills have a built-in feed from a reservoir; check the valve is open and the fluid flows when you lower the cutter.

    Use a cutting fluid or lubricant recommended by the cutter or drill maker for the material, not household substitutes. For overhead or awkward positions, a cutting paste or stick is often used instead. Dry cutting overheats the edges quickly.

    Shop Similar Categories