WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 402050  

    HMT GoldMax TCT Burr (Flame)
    402050

    Select Option 
    Prices From £29.58 ex VAT

    GoldMax TCT Burrs are made to the highest specifications, giving metalworkers a precision cut, high control, and long life. These burrs are recommended for use with high-speed die grinders or straight grinders. All burrs are 100% braze tested for strength and safety.

    HMT TCT Burrs FAQs

    Straight answers on choosing, fitting and using tungsten carbide rotary burrs for deburring, shaping and weld dressing.

    What are tungsten carbide (TCT) burrs used for?icon-minus-redicon-plus-red

    TCT burrs are rotary files that run in a die grinder or similar high-speed tool. They remove material from metal quickly and are used for deburring cut edges, chamfering, shaping, blending and cleaning up welds, as well as enlarging or finishing holes and working into awkward corners.

    Carbide stays hard at working temperatures, so a burr usually outlasts an ordinary steel file or a grinding stone on the same job. Always match the burr to the material and the shape of the job, and follow the burr and grinder makers' instructions.

    What speed should I run a carbide burr at?icon-minus-redicon-plus-red

    Never exceed the maximum speed marked on the burr or the grinder. The burr's rated maximum should be at least as high as the speed of the tool you are using, and a die grinder should be checked against its own marked speed.

    Within that limit, harder metals such as stainless steel usually need a lower speed than soft metals such as aluminium. Burrs with long shanks need extra care and a reduced speed. If you are unsure of the actual speed of an air or electric grinder, check the maker's data and have it verified before fitting the burr.

    What protective equipment do I need when using a burr?icon-minus-redicon-plus-red

    Wear eye protection every time, because chips and sparks fly off at high speed. Burr makers also recommend hearing protection, a dust mask, and protective gloves, and say the tool should be held with both hands. Keep guards in place where fitted and secure the workpiece so that it cannot move.

    A carbide burr screaming against metal is loud, so do not skip ear protection on longer jobs. Your risk assessment and the manufacturer's instructions decide exactly what you need for your task.

    How do I fit a burr in the grinder correctly?icon-minus-redicon-plus-red

    Make sure the shank diameter matches the collet. Do not mix metric shanks with inch collets, as a burr that looks close can work loose and be thrown out even when tightened firmly. Push the shank well into the collet so that only the head and as little shank as possible is exposed, and keep at least the minimum grip the grinder maker specifies.

    Tighten the collet properly, then run a new burr briefly in a safe position, away from people, before starting work. Stop at once if there is excessive vibration.

    Shop Similar Categories