WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 402060  

    HMT GoldMax TCT Burr (Tree)
    402060

    Select Option 
    Prices From £29.79 ex VAT

    GoldMax TCT Burrs are made to the highest specifications, giving metalworkers a precision cut, high control, and long life. These burrs are recommended for use with high-speed die grinders or straight grinders. All burrs are 100% braze tested for strength and safety.

    HMT TCT Burrs FAQs

    Straight answers on choosing, fitting and using tungsten carbide rotary burrs for deburring, shaping and weld dressing.

    How do I choose the right burr shape?icon-minus-redicon-plus-red

    Pick the shape that fits the surface you are working on. A cylinder, with a flat or rounded end, suits flat surfaces, edge deburring and weld removal. A ball suits concave cuts, hollowing and rounding edges. A tree (pointed or rounded) is used for V-grooves, fillets and curves, and a flame reaches tight areas while still working larger surfaces. A cone is handy for chamfering and deburring in narrow spaces.

    If you are unsure, a mixed set of common shapes is a sensible starting point. Shape letter codes differ between makers, so check the description rather than relying on the code alone.

    What is the difference between single cut, double cut and aluminium cut burrs?icon-minus-redicon-plus-red

    A single cut burr has one spiral flute and removes material quickly, usually leaving a rougher finish. A double cut burr has a second set of cross-cut teeth that breaks the chips up, giving better control and a smoother finish. An aluminium cut burr has wide, deep flutes that clear soft metal and resist clogging.

    For aluminium and other soft metals, an aluminium cut burr is the usual choice. For steel and stainless, suppliers differ: many suggest double cut for control and finish, while some prefer single cut for faster removal. Check the burr maker's recommendation for your material.

    What speed should I run a carbide burr at?icon-minus-redicon-plus-red

    Never exceed the maximum speed marked on the burr or the grinder. The burr's rated maximum should be at least as high as the speed of the tool you are using, and a die grinder should be checked against its own marked speed.

    Within that limit, harder metals such as stainless steel usually need a lower speed than soft metals such as aluminium. Burrs with long shanks need extra care and a reduced speed. If you are unsure of the actual speed of an air or electric grinder, check the maker's data and have it verified before fitting the burr.

    What protective equipment do I need when using a burr?icon-minus-redicon-plus-red

    Wear eye protection every time, because chips and sparks fly off at high speed. Burr makers also recommend hearing protection, a dust mask, and protective gloves, and say the tool should be held with both hands. Keep guards in place where fitted and secure the workpiece so that it cannot move.

    A carbide burr screaming against metal is loud, so do not skip ear protection on longer jobs. Your risk assessment and the manufacturer's instructions decide exactly what you need for your task.

    Shop Similar Categories