WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE

HMT Mag Drills

Unique benefits from the most comprehensive range of magnetic drilling systems on the market. From the lightest, most compact cordless machine on the market to machines with variable speed, variable torque and forward/reverse as standard, Holemaker Technology's advanced magnetic drills have been custom engineered to optimise performance.

HMT Mag Drills FAQs

Straight answers to the questions people ask most when choosing and using magnetic drilling machines.

What is a magnetic drill and what is it used for?icon-minus-redicon-plus-red

A magnetic drill is a portable drilling machine with a powerful electromagnet in its base. When switched on, the magnet clamps the machine firmly to steel, so you can drill accurate holes on site or in the workshop without a drill press.

It is mainly used with annular (hollow core) cutters to make clean holes in structural steel, plate, beams, channel, pipe and fabrications. It is widely used in steel erection, fabrication, shipbuilding, rail and plant maintenance.

How do I choose the right magnetic drill?icon-minus-redicon-plus-red

Start with the largest hole diameter and the deepest cut you need, then match the machine's capacity to that. Next consider the type of work: heavy plate in a workshop suits a larger, more powerful machine, while site work at height or in tight spaces favours a lighter, compact one.

Also think about power supply, whether you need variable speed for different cutter sizes and materials, and whether you need reverse for tapping. Check the spindle fitting so it suits the cutters you plan to use. Our team can help you choose.

Corded or cordless magnetic drill - which is better?icon-minus-redicon-plus-red

It depends on where you work. A corded machine gives consistent power for long runs of production drilling and heavy cutters. A cordless machine is far more convenient on site, at height or where no supply is close, and avoids trailing leads.

Cordless models rely on battery capacity, so plan the number of holes per charge and keep a spare battery for a full day's work. For the largest holes and continuous drilling, many users still prefer mains power. Check the manufacturer's stated hole capacity for each type.

What can a magnetic drill be fixed to, and what affects the magnet's grip?icon-minus-redicon-plus-red

The magnet only holds well on ferrous steel. It will not grip aluminium, stainless steels that are non-magnetic, copper or plastics, so those need a clamp, vacuum base or other fixing method.

Holding force depends on the thickness, flatness and cleanliness of the steel. Thin sheet, rough or painted surfaces, rust, swarf under the base and curved surfaces all reduce the grip. Clean the surface and the magnet face, and use the manufacturer's guidance on minimum material thickness. On pipe or uneven work, use a suitable pipe or V-base and a safety chain or strap.

Which cutters and accessories do I need with a magnetic drill?icon-minus-redicon-plus-red

Most magnetic drills are used with annular cutters, which cut only the outer ring of the hole and leave a slug of metal. These are quicker and need less power than a twist drill. You also need a pilot pin matched to the cutter, an arbor or adaptor that fits the spindle, and a suitable cutting fluid.

A twist drill chuck adaptor or a tapping attachment may be useful for small holes or threads. Always check that the cutter shank type matches your machine's spindle before choosing.

What speed and feed should I use?icon-minus-redicon-plus-red

Larger cutters need slower speeds and smaller cutters faster ones, and harder or tougher materials such as stainless steel need slower speeds than mild steel. A variable speed machine lets you match the speed to the cutter and the job.

Feed steadily with even pressure and let the cutter do the work. Forcing it overloads the motor and chips the teeth; too light a feed makes it rub and blunt. The cutter manufacturer's speed recommendations should be your starting point. Listen for the sound: a steady cut and a continuous swarf curl suggest you are close.