WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
  • 803084  HMT Steelbor RTQ40 Low Profile Magnet Drill with STAKIT Base 200 Case
  • 803084  HMT Steelbor RTQ40 Low Profile Magnet Drill with STAKIT Base 200 Case
Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

Rapid Ref : 803084  

HMT Steelbor RTQ40 Low Profile Magnet Drill with STAKIT Base 200 Case
803084

Select Option 
Prices From £1088.00 ex VAT
 Buy in 3 easy interest free payments of £35.19† with

The RTQ40 fits where other drill can't, combining compact height with serious cutting power up to 40mm. Built for structural steelwork and confided access, the TG40 is the lowest profile drill in the range. With a ratchet-feed system and powerful motor, it delivers clean broaching in overhead, inside-beam or baseplate jobs other machines can't reach. 

  • Only 180mm tall, perfect for restricted or confined access
  • 40mm cutting capacity with HSS or TCT cutters
  • Ratchet feed enables controlled drilling in tight areas
  • Weldon shank compatible for full tooling flexibility
  • Built-in cooling system extends cutter life and precision
  • Compact but powerful, ideal for fabrication and site work

Product Details

Specification

MAX TCT CUTTER CAPACITY 40mm
MAX HSS CUTTER CAPACITY 36mm 
TWIST DRILL CAPACITY 13mm
COUNTERSINKING 32mm
LENGTH 310mm
WIDTH 135mm
HEIGHT 180mm
WEIGHT
10.8Kg
STROKE 40mm
MAGNETIC FORCE 1200Kg
MOTOR POWER 1050W
TOTAL POWER 1100W 
SPEED RPM (No Load) 700RPM
SPINDLE WELDON Quick change 19.05mm 3/4" Weldon arbor for all standard broaching cutters
COOLANT SYSTEM Optional extra
WARRANTY
2 Years (When registered)

Brochures & Manuals

BROCHURES & MANUALS
   View Brochure
   HMT RTQ 40 Operating Manual

HMT Mag Drills FAQs

Straight answers to the questions people ask most when choosing and using magnetic drilling machines.

What is a magnetic drill and what is it used for?icon-minus-redicon-plus-red

A magnetic drill is a portable drilling machine with a powerful electromagnet in its base. When switched on, the magnet clamps the machine firmly to steel, so you can drill accurate holes on site or in the workshop without a drill press.

It is mainly used with annular (hollow core) cutters to make clean holes in structural steel, plate, beams, channel, pipe and fabrications. It is widely used in steel erection, fabrication, shipbuilding, rail and plant maintenance.

Corded or cordless magnetic drill - which is better?icon-minus-redicon-plus-red

It depends on where you work. A corded machine gives consistent power for long runs of production drilling and heavy cutters. A cordless machine is far more convenient on site, at height or where no supply is close, and avoids trailing leads.

Cordless models rely on battery capacity, so plan the number of holes per charge and keep a spare battery for a full day's work. For the largest holes and continuous drilling, many users still prefer mains power. Check the manufacturer's stated hole capacity for each type.

What can a magnetic drill be fixed to, and what affects the magnet's grip?icon-minus-redicon-plus-red

The magnet only holds well on ferrous steel. It will not grip aluminium, stainless steels that are non-magnetic, copper or plastics, so those need a clamp, vacuum base or other fixing method.

Holding force depends on the thickness, flatness and cleanliness of the steel. Thin sheet, rough or painted surfaces, rust, swarf under the base and curved surfaces all reduce the grip. Clean the surface and the magnet face, and use the manufacturer's guidance on minimum material thickness. On pipe or uneven work, use a suitable pipe or V-base and a safety chain or strap.

Which cutters and accessories do I need with a magnetic drill?icon-minus-redicon-plus-red

Most magnetic drills are used with annular cutters, which cut only the outer ring of the hole and leave a slug of metal. These are quicker and need less power than a twist drill. You also need a pilot pin matched to the cutter, an arbor or adaptor that fits the spindle, and a suitable cutting fluid.

A twist drill chuck adaptor or a tapping attachment may be useful for small holes or threads. Always check that the cutter shank type matches your machine's spindle before choosing.

Shop Similar Categories