WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 40311  

    Jackson Airmax+ PAPR System Pre-Filters (Pack of 10)
    40311

    £23.84  EX VAT
    SSP Suggested Selling Price = £29.80  YOU SAVE £5.96

    Jackson Translight 455 with Airmax+ System Parts FAQs

    Spares and consumables for a powered air welding helmet system, and how to work out the right ones for your unit.

    Why is a powered air helmet a good choice for welding, and what does that mean for spares?icon-minus-redicon-plus-red

    The HSE describes a powered or supplied-air respirator that combines respiratory, eye and face protection as the best option for arc welders, and says it needs an assigned protection factor of at least 20.

    The protection depends on the whole system working together, so spares need to be parts the maker intends for your unit: blower, filters, hose, seals and headgear. Parts that look similar but are not approved for your system can change the airflow or fit, so check the manual before ordering.

    Can I mix parts from different makers or different helmet models?icon-minus-redicon-plus-red

    It is best not to. The protection of a powered air system depends on the blower, hose, filters and head top being used as a tested combination, and the HSE says an RPE programme should cover compatibility with other protective equipment such as welding visors.

    Use the combination your manual lists. If you are not sure that a part suits your unit, check the data plate, the manual and the markings on the old part, or ask our team to help identify it.

    Who can service or repair a powered air unit?icon-minus-redicon-plus-red

    The HSE says the wearer may be able to carry out simple maintenance such as cleaning, but that more intricate repairs should be carried out by a competent person. Follow the maker's schedule for examination, replacement and testing.

    Changing a hose, filter or seal is often straightforward, but opening the blower or replacing electronic parts is not a job for the user. Keep any records your employer's RPE programme requires.

    What does the hose do, and when should it be replaced?icon-minus-redicon-plus-red

    The hose carries filtered air from the blower to the helmet. Maker guidance generally says to inspect it before use and replace it if it is cracked, deformed, kinked permanently or leaking.

    Spatter and abrasion are the usual causes of damage. A hose cover or flame-resistant sleeve helps protect it, but check the hose under the cover as well, because damage can be hidden. Do not tape over a split and carry on, since leaks reduce the air reaching you.

    Shop Similar Categories