Portability is number one when you have to go to the job — because it can’t come to you. The MPi 220P contains all you need to MIG weld in one small lightweight package. With the flip of a switch, all processes are available to meet the application at hand. Full weld process capability of MIG/MAG, Pulse, Stick, and TIG are available to meet the demand of current applications. This Multi-Process MIG /TIG /Arc Package includes MB25 3m MIG Torch, CK17V 4m, Switched & Sheathed TIG Torch with Gas Valve, 0.8/1mm V-Groove Drive roll kit, electrode holder, workpiece clamp and power cord.
Features
Large graphical display: guides user through process and parameter setup with ease and high visibility.
Synergic welding mode offers the simplicity of single-knob control. The machine will select the correct voltage and amperage based on the wire feed speed (WFS) set by the operator.
Adjustable Hot Start™ for Stick arc starts. Adjust the optimal start current for the application. The current automatically increases the output amperage at the start of a weld.
Thermal Overload Protection (Click for Demonstration) - shuts down unit and activates over temperature light if the airflow is blocked or duty cycle is exceeded. Automatically resets when a fault is corrected and the unit cools.
Built-in upslope/downslope function for TIG helps provide better arc starts and reduces craters.
Adjustable preflow and postflow give the operator better control of the gas parameters affecting the weld zone.