WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 790142087  

    Orbitalum Swivel Cable Complete, 120 V, 50/60 Hz GB 4m Length
    790142087

    £189.00  EX VAT
     Buy in 3 easy interest free payments of £63.00† with

    PS Accessories FAQs

    Answers for choosing and using saw blades, clamping jaws, feeders, lubricant, cables and laser kits for orbital pipe cutting saws.

    What accessories does an orbital pipe cutting saw use?icon-minus-redicon-plus-red

    Typical accessories are saw blades, clamping jaws and extension jaws for different pipe sizes, a pipe feeder or support, blade lubricant, a mains cable and sometimes a laser alignment kit.

    The saw clamps onto the pipe and the blade travels around it, so the jaws and blade have to suit both the machine and the pipe. Check your machine's manual or data plate for the parts it takes, and give the exact model when you ask for spares.

    How do I choose the right saw blade?icon-minus-redicon-plus-red

    Blade choice depends mainly on the pipe wall thickness and material. As a general rule, blades with more teeth suit thinner walls and blades with fewer, coarser teeth suit thicker walls, so that several teeth are always in contact with the cut.

    The blade diameter and bore must also fit your machine. Check the maker's blade chart for your machine, and do not use a blade that is not specified for it.

    How do I choose clamping jaws?icon-minus-redicon-plus-red

    The jaws must suit the diameter range of the pipe you are cutting, and fit your machine. They close towards the centre of the pipe to hold it concentric, which helps the cut stay square without distorting the pipe.

    Extension jaws are used where the standard jaws do not cover your pipe size. Make sure all jaws are the correct set, clean and fully tightened before you start cutting.

    Why use saw blade lubricant, and how often?icon-minus-redicon-plus-red

    Lubricant reduces friction and heat, which helps the blade last longer and gives a cleaner cut. Use only the lubricant the maker recommends for the blade, as ordinary oils can cause problems.

    The maker's manual states how often to apply it, and the interval can depend on pipe size and material, so a larger pipe or a harder material may need it before every cut. Follow the instructions for your machine.

    Shop Similar Categories