PS Accessories FAQs
Answers for choosing and using saw blades, clamping jaws, feeders, lubricant, cables and laser kits for orbital pipe cutting saws.
What accessories does an orbital pipe cutting saw use?

Typical accessories are saw blades, clamping jaws and extension jaws for different pipe sizes, a pipe feeder or support, blade lubricant, a mains cable and sometimes a laser alignment kit.
The saw clamps onto the pipe and the blade travels around it, so the jaws and blade have to suit both the machine and the pipe. Check your machine's manual or data plate for the parts it takes, and give the exact model when you ask for spares.
How do I choose the right saw blade?

Blade choice depends mainly on the pipe wall thickness and material. As a general rule, blades with more teeth suit thinner walls and blades with fewer, coarser teeth suit thicker walls, so that several teeth are always in contact with the cut.
The blade diameter and bore must also fit your machine. Check the maker's blade chart for your machine, and do not use a blade that is not specified for it.
How do I choose clamping jaws?

The jaws must suit the diameter range of the pipe you are cutting, and fit your machine. They close towards the centre of the pipe to hold it concentric, which helps the cut stay square without distorting the pipe.
Extension jaws are used where the standard jaws do not cover your pipe size. Make sure all jaws are the correct set, clean and fully tightened before you start cutting.
Why use saw blade lubricant, and how often?

Lubricant reduces friction and heat, which helps the blade last longer and gives a cleaner cut. Use only the lubricant the maker recommends for the blade, as ordinary oils can cause problems.
The maker's manual states how often to apply it, and the interval can depend on pipe size and material, so a larger pipe or a harder material may need it before every cut. Follow the instructions for your machine.