WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE

Spot Welders

Spot Welders FAQs

Straight answers to the questions people ask most when choosing and using a resistance spot welder.

How does a spot welder work?icon-minus-redicon-plus-red

A spot welder clamps two or more overlapping sheets between two copper electrodes and passes a large electric current through them for a very short time. The metal resists the current, so it heats most where the sheets meet, and a small spot of metal melts and fuses the sheets together. The pressure of the electrodes holds the sheets in contact and forges the weld as it cools.

It needs no filler, gas or flux, and each weld takes only a short time, so it is quick and clean, which is why it is so widely used in sheet metal and production work.

What materials and thicknesses can a spot welder join?icon-minus-redicon-plus-red

Spot welding is mainly used on sheet metal, especially low-carbon steel, and also on stainless steel and coated steels. The thickness it can join depends on the machine, mainly its power rating, electrode force and arm size. Larger machines handle thicker sheet.

Aluminium and copper alloys conduct electricity and heat so well that they need much higher current and often a machine designed for them, so a general steel machine may not suit. Coated or galvanised steel usually needs more current or force, and more electrode care. The maker's data sheet states the thicknesses a machine can handle.

What types of spot welder are there?icon-minus-redicon-plus-red

Hand-held spot welding guns are portable and are used for repair and light work where you take the gun to the job. Station machines have fixed arms and the work is brought to them, which gives consistent results on repeat jobs. Larger industrial machines, often operated by foot pedal or by compressed air, handle thicker or higher-volume production work. Inverter (medium frequency) machines use electronic control to give precise, efficient control of the weld current and are used for demanding work.

Choose by the material, thickness, volume of work and whether it is easier to move the gun or the work.

What do the kVA rating, arm length and throat depth tell me?icon-minus-redicon-plus-red

The kVA rating shows the machine's power capacity and is a rough guide to the thickness it can weld: a higher rating suits thicker or tougher work. The arms carry the current to the electrodes. Their length sets the throat depth, which is how far in from the edge of a panel you can reach, and the gap between the arms sets the height of work you can fit.

Longer arms give more reach but may reduce the current that reaches the weld, so choose arms no longer than the job needs. The data plate and manual state the arm options and the thickness the machine can weld.

What settings control the quality of a spot weld?icon-minus-redicon-plus-red

Three things matter most: the welding current, the weld time and the electrode force. Too little current or time gives a weak weld or none, while too much causes burn-through, splashing of molten metal and marked surfaces. Too little force can cause spitting and a poor weld, and too much can squeeze the sheets and shorten electrode life.

Many machines also control a squeeze time before the current flows and a hold time afterwards, while the weld cools under pressure. Start from the maker's guidance for your material and thickness, make test welds on offcuts and adjust one setting at a time.

How do I look after the electrodes?icon-minus-redicon-plus-red

Electrode tips wear, mushroom out and pick up contamination, which spreads the current over a larger area and weakens the weld. Dress them regularly with the correct tool or file to restore their shape, and replace them when they are too short or damaged. Use electrodes of the type and shape the maker recommends for the material.

Keep the electrodes and arms aligned and tight in their holders. On water-cooled machines, keep the cooling circuit flowing, because poor cooling shortens electrode life and can overheat the machine.