WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE

HMT CarbideMAX TCT 110 Cutters

HMT CarbideMAX TCT 110 Cutters FAQs

Straight answers to the questions people ask most when choosing and using deep carbide-tipped annular cutters.

What is a deep carbide-tipped annular cutter?icon-minus-redicon-plus-red

It is a hollow cutter with tungsten carbide teeth that removes a ring of metal and leaves a solid slug. Deep versions are made for thick sections and stacked plate that a shorter cutter cannot cut through in one pass.

The carbide teeth stay sharp far longer than high speed steel, but they are more brittle, so they need a rigid, well-gripped machine. Each cutter has a maximum depth of cut. Check this on the cutter and in the maker's literature, and make sure it is greater than the thickness of your material.

When do I need a deep cutter rather than a standard one?icon-minus-redicon-plus-red

When the steel you are cutting through is thicker than a standard depth cutter can handle, for example heavy sections, stacked plate or thick flanges.

If the material is thin, a shorter cutter is stiffer and gives a better result. Choose the shortest depth that cuts through your material.

What machine do I need to run a deep carbide cutter?icon-minus-redicon-plus-red

Use a rigid magnetic drill, or similar machine designed for annular cutters, with a firm magnet and a shank type that matches the cutter. Annular cutters should not be run in a handheld drill. Deep cutters are long and put more load on the machine, so check that its rated capacity covers the cutter diameter and depth, and that it has enough stroke.

A worn or underpowered machine may vibrate, which chips carbide teeth. Always check the data plate and manual for your own machine, and use the safety strap or chain.

How do I choose the right pilot pin?icon-minus-redicon-plus-red

Pilot pins come in versions for different diameter bands, and some are one-piece and some two-piece for larger sizes. They must match the series and the diameter of the cutter.

The pin has to be long enough to reach through the deep cutter and eject the slug. Use the pin specified for the cutter, and replace worn pins promptly.

What is a coated carbide cutter?icon-minus-redicon-plus-red

Some cutters have a surface coating that reduces friction and heat, which can lengthen life and help in tough conditions. The coating wears away with use.

A coated cutter still needs proper fluid, steady feed and a firm setup.

How do I get a good result in thick steel?icon-minus-redicon-plus-red

Make sure the magnet is gripping on clean, flat steel, secure the machine with a strap, and apply plenty of cutting fluid. Start the cut gently, then feed steadily with even pressure and avoid stopping with the cutter in the cut.

For very deep holes, ease the cutter back now and then to clear swarf if the maker advises.