WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : SETFM-LS-06  

    HMT VersaDrive STAKIT Large 6 Space InsertFoam for Reamers, HD DrillTaps, Extra Long HoleCutters, Long Series ImpactaTaps (up to M12), CarbideMax 80 & 110
    SETFM-LS-06

    £19.21  EX VAT
    SSP Suggested Selling Price = £22.60  YOU SAVE £3.39

    This holds six compatible tools up to 195mm long and 26mm in diameter. Compatible tooling - Reamers, HD DrillTaps, Extra Long HoleCutters, Long Series ImpactaTaps (up to M12), CarbideMax 80 & 110.

    The InsertFoam system is an innovative new addition to the STAKIT Storage system. Modular and customisable tool case storage to organise your most important cutting tool sets easily and efficiently.

    • Protect essential tooling
    • Store & organise tooling so it is accessible where & when needed
    • Compatible with STAKIT Top cases
    • Integrate tooling into a STAKIT system for ultimate portability
    • Flexible design accommodates a wide variety of tooling designs
    • Easily create your own custom kits

    Related Items

    HMT CarbideMAX TCT 110 Cutters FAQs

    Straight answers to the questions people ask most when choosing and using deep carbide-tipped annular cutters.

    When do I need a deep cutter rather than a standard one?icon-minus-redicon-plus-red

    When the steel you are cutting through is thicker than a standard depth cutter can handle, for example heavy sections, stacked plate or thick flanges.

    If the material is thin, a shorter cutter is stiffer and gives a better result. Choose the shortest depth that cuts through your material.

    What machine do I need to run a deep carbide cutter?icon-minus-redicon-plus-red

    Use a rigid magnetic drill, or similar machine designed for annular cutters, with a firm magnet and a shank type that matches the cutter. Annular cutters should not be run in a handheld drill. Deep cutters are long and put more load on the machine, so check that its rated capacity covers the cutter diameter and depth, and that it has enough stroke.

    A worn or underpowered machine may vibrate, which chips carbide teeth. Always check the data plate and manual for your own machine, and use the safety strap or chain.

    How do I choose the right pilot pin?icon-minus-redicon-plus-red

    Pilot pins come in versions for different diameter bands, and some are one-piece and some two-piece for larger sizes. They must match the series and the diameter of the cutter.

    The pin has to be long enough to reach through the deep cutter and eject the slug. Use the pin specified for the cutter, and replace worn pins promptly.

    How do I get a good result in thick steel?icon-minus-redicon-plus-red

    Make sure the magnet is gripping on clean, flat steel, secure the machine with a strap, and apply plenty of cutting fluid. Start the cut gently, then feed steadily with even pressure and avoid stopping with the cutter in the cut.

    For very deep holes, ease the cutter back now and then to clear swarf if the maker advises.

    Shop Similar Categories