WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 0700000369  

    ESAB Aristo Tech Sweatband (Pack of 2)
    0700000369

    £9.39  EX VAT
    SSP Suggested Selling Price = £12.52  YOU SAVE £3.13

    ESAB Aristo Tech HD Parts FAQs

    Plain answers on replacing the cover lenses and sweatbands of an auto-darkening welding helmet, and how to be sure you order the right spare.

    When should I replace the outer cover lens?icon-minus-redicon-plus-red

    Replace it when it is cracked, scratched, pitted or so dirty that cleaning will not restore a clear view. Helmet makers' manuals say to replace a damaged front cover lens regularly, and some say to inspect it often and replace it immediately once it is scratched, cracked or pitted by spatter.

    A marked lens scatters the arc light, makes it harder to see the joint and strains your eyes, which can lead to poor welds. How often you will need a new one depends on the process, the amount of spatter and how the helmet is stored, so check it before each work session.

    When does the inner cover lens need replacing?icon-minus-redicon-plus-red

    The inner cover lens is protected by the filter and outer lens, so it usually lasts much longer than the front one. Maker manuals say to replace it if it is damaged. Also replace it if it becomes scratched, hazy or marked in a way that cleaning will not remove, because it sits right in your line of sight.

    If your view is poor even after the outer lens is new and clean, check the inner lens and the filter surface as well. Take care when removing it, since many designs flex the inner lens out of its holder and a rough pull can bend it or damage the filter.

    Is it safe to weld with a cracked or missing cover lens?icon-minus-redicon-plus-red

    No. Replace a cracked or damaged cover lens before you weld. Cover lenses keep spatter off the filter, and manuals state that the filter must only be used together with its inner cover lens, so never weld with either lens missing.

    A crack or pit also distorts your view of the weld pool. If the filter itself is cracked or damaged, or fails to darken when you strike an arc, stop welding immediately and do not use the helmet until it has been put right. Use only the replacement parts the manual specifies, as unapproved parts or modifications can void the warranty and put the wearer at risk.

    How do I find the right replacement cover lens size for my helmet?icon-minus-redicon-plus-red

    Cover lenses are sized to fit a particular helmet shape, and sizes differ between helmet types. Do not choose by looks. Find the helmet model on the label or in the manual, then use the spare parts list in the manual to see which front lens and inside lens go with it. Note whether you need a front (outer) or inside (inner) lens, because they are different sizes.

    If you only have the old lens, measure the width and height of the lens itself, but also compare them with the helmet model. Manufacturers say to use only the replacement parts that their manual specifies, so confirm before ordering.

    Shop Similar Categories