WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 103019-0170  Mfr Ref : 108020P-0170

    HMT CarbideMax 55 Broach Cutter Pilot Pin 12-17mm (Pack of 2)
    108020P-0170 103019-0170

    £16.66  EX VAT
    SSP Suggested Selling Price = £19.60  YOU SAVE £2.94

    High quality, fully ground HSS pilot ejector pin for CarbideMax 55 TCT Broach cutters.



    Related Items

    HMT Pilot Pins FAQs

    Straight answers to the questions people ask most when choosing and using pilot pins for annular cutters.

    How do I pick the right pilot pin for my cutter?icon-minus-redicon-plus-red

    The pin must match the cutter series, the cutter's diameter range and the depth of cut. Pins are made for specific cutter families and size bands, and a pin that is too short will not eject the slug while one that is too long can foul the workpiece.

    Check the cutter's markings or the manufacturer's chart, and match the pin to the cutter, not just the hole diameter. If you are unsure, our team can help you choose.

    What is the difference between one-piece and two-piece pilot pins?icon-minus-redicon-plus-red

    Pins are made in different constructions to suit different cutter sizes and depths, and larger or deeper cutters often need a longer or multi-part pin. Which construction you need is set by the cutter and the machine, not by personal preference.

    Check the data plate and manual for your machine and the cutter's markings, and use the pin they specify. Check that any multi-part pin is assembled correctly and moves freely before use.

    Why is my pilot pin not ejecting the slug?icon-minus-redicon-plus-red

    The commonest causes are the wrong pin for the cutter, a pin that is too short, a bent or damaged pin, or swarf and dried coolant blocking the bore. Sometimes the slug is simply stuck because the cutter has been over-fed or is blunt.

    Stop the machine, remove the cutter and clean the pin and cutter bore. Replace a pin that is worn, bent or sticking. Never reach in while the machine is running, and take care as the slug and cutter can be hot and sharp.

    How do I know when a pilot pin needs replacing?icon-minus-redicon-plus-red

    Look for bending, wear at the tip, damage to the shank, a loose or sloppy fit in the cutter, or a pin that no longer slides freely. A worn pin can cause the cutter to wander, leaving oval holes, and may lead to broken teeth.

    Pilot pins are consumable parts and protect a far more valuable cutter, so replace them as soon as you suspect wear. Many users change them regularly as part of a routine.

    Shop Similar Categories