WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 108020-0240-P10  

    HMT CarbideMax 55 TCT Magnet Broach Cutter 24mm (Pack of 10)
    108020-0240-P10

    £589.90  EX VAT
    SSP Suggested Selling Price = £694.00  YOU SAVE £104.10
     Buy in 3 easy interest free payments of £196.63† with

    Related Items

    HMT Bulk Cutter Products FAQs

    Answers for buyers of multi-pack carbide-tipped annular cutters and hole cutters for magnetic drilling machines.

    Should I choose HSS or carbide-tipped (TCT) cutters?icon-minus-redicon-plus-red

    High speed steel (HSS) cutters are the general-purpose choice and can be resharpened. Carbide-tipped (TCT) cutters have tungsten carbide inserts brazed onto the cutting edges and are generally chosen for harder materials and longer life, which is why they suit repeat work in bulk.

    TCT is less forgiving of a slow or unsteady spindle, because the carbide edges can chip. Check the lowest speed your drill can hold for the diameter you want, and follow the cutter maker's recommended speed and feed for the material.

    How do I know the cutter shank will fit my magnetic drill?icon-minus-redicon-plus-red

    Many annular cutters use a shank with flats, commonly 19 mm (3/4 inch), and larger diameters often use a bigger shank. Not every drill takes that style: some use a quick-change nose and need an adapter.

    Check the chuck or arbor fitting in your drill's manual or on its data plate before ordering. If you are unsure, compare the fitting on your existing cutters, or ask our team to help you match it.

    Why must I always use a pilot pin, and does it have to match the cutter?icon-minus-redicon-plus-red

    The pilot pin centres the cutter on your mark and pushes the slug out as the cut finishes. Cutters should not be run without a pilot pin, and the arbor should have an ejection spring.

    Pin length, diameter and spring travel often differ between cutter ranges, so use a pin recommended for the cutter series you are using, and keep spare pins with the cutters. A bent, sticky or worn pin is a common reason for slugs that will not eject, so replace it rather than forcing it.

    How can I tell when a cutter is worn, and can I resharpen it?icon-minus-redicon-plus-red

    Do not use blunt or damaged cutters: they cut slowly, overheat and are neither safe nor productive. Warning signs include chipped or missing teeth, an oversize or rough hole, more effort needed to feed, burning smells and discoloured edges.

    HSS cutters can usually be reground until too little length remains. Carbide-tipped cutters can sometimes be reground by a specialist, but it is harder and poor grinding can break the tips, so many users simply replace them when the carbide is worn or chipped. Ask the cutter maker what they advise. Check the first hole against the size marked on the cutter.

    Shop Similar Categories