WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 108040  

    HMT CarbideMax TCT Broach Cutter - 110mm Depth
    108040

    Select Option 
    Prices From £90.27 ex VAT

    The CarbideMax 110 Series will broach up to 110mm thickness of metal: 4X LONGER LIFE AND 15% FASTER CUT THAN HSS CUTTERS.

    Tungsten Carbide, one of the hardest materials used for cutting tools, can drill through the toughest steels. HMT CarbideMax TCT Broach cutters are tipped with individually brazed cutting teeth of the highest quality tungsten carbide. They are designed with an elaborate cutting geometry, resulting in faster, quieter, easier drilling and chatter-free performance. Furthermore, because the teeth of the cutter are doing all of the hard work, less strain is put on the wall of the cutter. Therefore, the thinner wall means less metal is removed, giving a faster cut.

    HMT CarbideMAX TCT 110 Cutters FAQs

    Straight answers to the questions people ask most when choosing and using deep carbide-tipped annular cutters.

    What is a deep carbide-tipped annular cutter?icon-minus-redicon-plus-red

    It is a hollow cutter with tungsten carbide teeth that removes a ring of metal and leaves a solid slug. Deep versions are made for thick sections and stacked plate that a shorter cutter cannot cut through in one pass.

    The carbide teeth stay sharp far longer than high speed steel, but they are more brittle, so they need a rigid, well-gripped machine. Each cutter has a maximum depth of cut. Check this on the cutter and in the maker's literature, and make sure it is greater than the thickness of your material.

    When do I need a deep cutter rather than a standard one?icon-minus-redicon-plus-red

    When the steel you are cutting through is thicker than a standard depth cutter can handle, for example heavy sections, stacked plate or thick flanges.

    If the material is thin, a shorter cutter is stiffer and gives a better result. Choose the shortest depth that cuts through your material.

    What is a coated carbide cutter?icon-minus-redicon-plus-red

    Some cutters have a surface coating that reduces friction and heat, which can lengthen life and help in tough conditions. The coating wears away with use.

    A coated cutter still needs proper fluid, steady feed and a firm setup.

    How do I get a good result in thick steel?icon-minus-redicon-plus-red

    Make sure the magnet is gripping on clean, flat steel, secure the machine with a strap, and apply plenty of cutting fluid. Start the cut gently, then feed steadily with even pressure and avoid stopping with the cutter in the cut.

    For very deep holes, ease the cutter back now and then to clear swarf if the maker advises.

    Shop Similar Categories