WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 108050  

    HMT CarbideMax TCT Ultralong Broach Cutter - 200mm Depth
    108050

    Select Option 
    Prices From £252.58 ex VAT

    These unique CarbideMax TCT Annular cutters are for the most extreme drilling depths through thick metal, box sections or stacked plate. The CarbideMax 200mm Broach Cutter has precision drilling flutes and a specially engineered geometry for accurate cutting. These cutters come with a standard 19.05mm Weldon shank for use in any magnet drill with sufficient stroke.

    Tungsten Carbide, one of the hardest materials used for cutting tools, can drill through the toughest steels. HMT CarbideMax TCT Broach cutters are tipped with individually brazed cutting teeth of the highest quality tungsten carbide. They are designed with an elaborate cutting geometry, which results in faster, quieter, easier drilling and chatter-free performance. Furthermore, because the teeth of the cutter are doing all of the hard work, less strain is put on the wall of the cutter. Therefore, the thinner wall means less metal is removed, giving a faster cut.

    HMT UltraLong TCT Cutters FAQs

    Straight answers to the questions people ask most when choosing and using ultra-long carbide-tipped annular cutters.

    What is an ultra-long TCT annular cutter?icon-minus-redicon-plus-red

    It is a hollow, core-type cutter with tungsten carbide tips (TCT) on its cutting edge and a much deeper body than a standard cutter. It cuts only the outer ring of the hole and leaves a solid slug, so it needs less power than a twist drill.

    The extra length lets it cut through very thick sections in a single pass, such as heavy plate, stacked material, thick flanges and large fabrications.

    When do I need an ultra-long cutter instead of a standard one?icon-minus-redicon-plus-red

    You need one when the thickness you must cut through is greater than the cutting depth of your standard cutters. Common cases are heavy plate, thick structural sections, built-up assemblies, and several layers clamped together.

    If your standard cutter bottoms out before the hole is through, step up to a deeper one. Do not use a long cutter where a shorter one will do, as the extra length reduces rigidity and needs a suitable machine.

    What machine do I need to run an ultra-long cutter?icon-minus-redicon-plus-red

    A magnetic drill or other drilling machine with enough power, stroke and rigidity for the cutter's diameter and depth. The spindle must also take the cutter's shank fitting, either directly or through an adaptor.

    Check the machine's stated maximum cutting depth and diameter, and whether the stroke is long enough for the full depth of the cutter. Underpowered machines stall or vibrate, which damages carbide tips.

    What speed and feed should I use with deep cutters?icon-minus-redicon-plus-red

    Follow the maker's speed recommendations for the cutter diameter and material, and run deeper cutters towards the lower end of the range if the machine shows any vibration. Use a steady, firm feed without forcing.

    Hard materials and larger diameters need slower speeds. Carbide wants a constant feed: too light a pressure makes it rub and chip, too heavy overloads the motor. Reduce the feed if the swarf turns to dust rather than curls.

    Shop Similar Categories