WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 115810-CSET  

    HMT VersaDrive STAKIT ImpactaDie Standard & XL Complete Kit (M6 - M24)
    115810-CSET

    £845.58  EX VAT
    SSP Suggested Selling Price = £994.80  YOU SAVE £149.22
     Buy in 3 easy interest free payments of £281.86† with
    Create or repair large diameter external threads on metal bar or conduit with the Versadrive Impactadie system. Offering fast, easy impact-thread cutting in a variety of sizes from M6 - M25, the Impactadie complete kit speeds up the challenging and traditionally time-consuming process of creating both small and large external threads. Utilize the speed and power of high-torque impact wrenches* or the power and precision of magnetic drills to reduce labour and fatigue, improve productivity and complete jobs in less time. The kit includes the Versadrive ImpactaBurr Chamfer tool for preparing bar and conduit prior to impact-threading for swift, accurate results. Supplied in a HMT Stakit compatible ETOP4 top case.

    HMT VersaDrive STAKIT Top Cases FAQs

    Practical answers on choosing and using top cases for impact drilling, reaming, threading and rivet removal bits.

    What is the difference between a thread die and a thread chaser?icon-minus-redicon-plus-red

    A thread die is a cutting tool that makes a new external thread on a bar or rod. A thread chaser is designed to clean, re-form and restore an existing thread that is dirty, rusty or lightly damaged.

    A cutting tool run over a damaged thread can remove more thread material than you want, so a chaser is the gentler choice where most of the thread is intact. Chasing only works if enough thread remains: if a bolt or stud is stripped, galled or badly mangled, replace it. Check the thread size and pitch first, and use cutting fluid when cutting a new thread.

    How do I remove a rivet with a drill?icon-minus-redicon-plus-red

    The usual method is to drill into the rivet head only, as far as the surface of the metal, so the head can be removed. The remaining shank is then driven out with a punch slightly smaller than the shank.

    The aim is to avoid distorting the metal or elongating the rivet hole, so keep the drill square to the work, drill no deeper than needed and support the part so it cannot move. Wear eye protection, and check the repair instructions for the equipment first, as some jobs call for a specific method.

    Do I need cutting fluid when drilling stainless or tough steel?icon-minus-redicon-plus-red

    Using an adequate supply of cutting fluid or coolant is good practice when drilling tough materials. Stainless steel in particular is far more prone to work hardening than ordinary steel, which makes the next cut harder and wears the bit faster.

    Keep the bit cutting a proper chip with a steady feed rather than letting it rub or dwell in the hole, because rubbing and repeated pecking tend to harden the surface. Clear swarf regularly, and apply fluid as the maker directs. Check the cutting fluid's safety data sheet before use.

    Does a sharp bit really make a difference to vibration and speed?icon-minus-redicon-plus-red

    Yes. HSE advises checking tools before use to avoid the extra vibration caused by faults or general wear, and keeping cutting tools sharp so that they stay efficient. A worn drill bit makes you push harder, builds heat and can leave a rough hole.

    Check your bits for a dulled cutting edge, chipped lips, bluing from heat or bending. Replace damaged bits rather than forcing them. Bits that cut cleanly need less pressure, which is better for the hole, the driver and your hands.

    Shop Similar Categories