WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 3M-532000  Mfr Ref : 532000

    3M Speedglas 9100 Heat-reflective Silver Lens Retainer 06-0300-55
    532000 3M-532000

    £23.59  EX VAT
    SSP Suggested Selling Price = £33.69  YOU SAVE £10.10

    9100 Series Parts FAQs

    Spare plates, filters, headbands and comfort parts for an auto-darkening welding helmet, and how to match them to your helmet.

    Can I clean a protection plate or filter with solvent?icon-minus-redicon-plus-red

    No. Makers' instructions say not to clean the front lens cover or the helmet with solvents or abrasive cleaning products, because they can scratch or cloud the surface. Use only the cleaning method in your helmet's manual, which is normally a soft, clean, lint-free cloth.

    Do not immerse the filter in water either. If a plate cannot be cleaned to a clear finish, replace it rather than trying harder to clean it.

    My filter will not darken or flickers. Is the filter faulty?icon-minus-redicon-plus-red

    Not necessarily. Start with the simple checks: look for a scratched or heavily spattered front plate, make sure the sensors on the filter are clean and not blocked by spatter or a hat brim, and check the battery or solar cell and the sensitivity and shade settings.

    Makers' instructions stress keeping the sensors clear and unobstructed so the filter can sense the arc. Some low-current work needs a more sensitive setting. If the filter still does not darken reliably after these checks, stop welding with it and follow the manual or ask the maker about a replacement filter. Never carry on and hope.

    What can happen if I keep using a damaged plate or a filter that does not darken?icon-minus-redicon-plus-red

    Welding radiation can injure the eyes. The HSE describes arc eye as an acute injury to the front of the eye (the cornea) caused by welding radiation, usually painful and red a few hours after the exposure. It also links welding ultraviolet radiation to a rare eye cancer, which is why it stresses protecting the eyes when welding.

    A filter that fails to darken, or a cracked plate or frame that lets light in, removes that protection. Take the helmet out of use until the faulty part has been replaced.

    What do the markings on a filter mean, and why do older filters show different markings?icon-minus-redicon-plus-red

    Filters usually carry a light-state shade, the dark shade or range, and an optical class. Older filters and helmet frames are marked to standards that have since been withdrawn and replaced by a newer international standard series, so newer products may carry different markings.

    Look at the markings on your own filter and helmet and quote them to us or the maker; do not guess the grade from how a filter looks.

    Shop Similar Categories